Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

ТЕМА: Encoders on e-coder mini

Encoders on e-coder mini 20 Янв 2022 17:30 #1

  • VE3EY
  • VE3EY аватар
  • Вне сайта
  • Сообщений: 12
  • Спасибо получено: 3
I have just received my e-coder mini and trying to make it work on the breadboard with SunSDR2 DX. Main VFO and push buttons are working well, however, I am unable to get the encoders to work.
I have wired the encoders into their respective spots marked on the board. eg Encoder 1, Encoder 2 etc.

clk --> 0
dt --> 90
gnd --> gnd
sw --> sw

After I assign the function to the encoder and push button from within EESDR2, the encoder does not work. The switch works fine but turning the encoder has no effect.
I also see that there is no +vcc connection from the board to the encoder and I wonder if that is the reason but if anyone has any suggestion I would appreciate any help.


2022-01-2012_25_55-E-Coder_mini_SCH1.pdf-AdobeAcrobatReaderDC64-bit.jpg



73
Nick VE3EY
Последнее редактирование: 20 Янв 2022 17:35 от VE3EY.
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.069 секунд