Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

ТЕМА: E-Coder on Linux

E-Coder on Linux 05 Авг 2018 11:03 #1

  • May
  • May аватар
  • Вне сайта
  • Сообщений: 4
Hi All,

I've recently transitioned my SunSDR2 Pro setup to Linux - Ubuntu 18.04 LTS.

I'm having trouble getting the E-Coder to work.

Ubuntu recognises it:

$ dmesg | grep E-Coder
[ 2.894774] usb 1-8.3: Product: E-Coder panel
[ 3.492192] hid-generic 0003:1FC9:0003.0008: hiddev3,hidraw5: USB HID v1.00 Device [EXPERT-ELECT E-Coder panel ] on usb-0000:00:14.0-8.3/input0

But ExpertSDR2 v1.2.0 doesn't. The "Panel" tab is there, and I can set the button functions, but nothing works..

Is there anything specific required to setup the E-Coder with Linux / Ubuntu ?

Regards, Peter.
Администратор запретил публиковать записи гостям.

E-Coder on Linux 12 Дек 2018 14:34 #2

  • May
  • May аватар
  • Вне сайта
  • Сообщений: 4
Bump topic - still no joy getting it to work / no repsonse.... help ???
Администратор запретил публиковать записи гостям.

E-Coder on Linux 15 Янв 2019 10:54 #3

  • S58WW
  • S58WW аватар
  • Вне сайта
  • A half-truth is the most cowardly of lies.
  • Сообщений: 148
  • Спасибо получено: 40
Hello all!
Dear admins!

I would also like to know the reason why E-coder (s) is not working on UBUNTU?

UBUNTU or ESDR2 problem?

It is not life and death emergency, but please let us know! (I have dual boot W10/UBUNTU PC so.... :D :D )

thank you in advance! заранее спасибо!
73 Pibo S58WW
2 X SUNSDR2pro
Main shack PC:
AMD RYZEN 7 2700 (8 cores ; 16 threads) 32 GB RAM
on Gigabyte Aorus Elite B450 with 1TB and 250 GB INTEL NVMe M.2
NVIDIA GeForce GTX 1660 SUPER
Администратор запретил публиковать записи гостям.

E-Coder on Linux 15 Янв 2019 11:09 #4

  • Rome
  • Rome аватар
  • Вне сайта
  • Quod Licet Jovi Non Licet Bovi
  • Сообщений: 1053
  • Спасибо получено: 529
Hi, Pibo.
By default Linux does not allow access to USB devices, to use them (including E-Coder) you need to enter the following lines when the system starts:
sudo chmod 664 /dev/hidraw*
sudo chgrp plugdev /dev/hidraw*
Роман, Roman
Expert Electronics
Администратор запретил публиковать записи гостям.
Спасибо сказали: S58WW

E-Coder on Linux 15 Янв 2019 11:26 #5

  • S58WW
  • S58WW аватар
  • Вне сайта
  • A half-truth is the most cowardly of lies.
  • Сообщений: 148
  • Спасибо получено: 40
Great support Rome!

I will try and report ...

HNY and al the best!
73 Pibo S58WW
2 X SUNSDR2pro
Main shack PC:
AMD RYZEN 7 2700 (8 cores ; 16 threads) 32 GB RAM
on Gigabyte Aorus Elite B450 with 1TB and 250 GB INTEL NVMe M.2
NVIDIA GeForce GTX 1660 SUPER
Администратор запретил публиковать записи гостям.
Спасибо сказали: Rome

E-Coder on Linux 15 Янв 2019 11:36 #6

  • S58WW
  • S58WW аватар
  • Вне сайта
  • A half-truth is the most cowardly of lies.
  • Сообщений: 148
  • Спасибо получено: 40
:D

WORKING!
I am impressed!
I always was sure that EXPERT ELECTRONICS is firm you can trust!

:hi:
73 Pibo S58WW
2 X SUNSDR2pro
Main shack PC:
AMD RYZEN 7 2700 (8 cores ; 16 threads) 32 GB RAM
on Gigabyte Aorus Elite B450 with 1TB and 250 GB INTEL NVMe M.2
NVIDIA GeForce GTX 1660 SUPER
Администратор запретил публиковать записи гостям.
Спасибо сказали: Rome

E-Coder on Linux 23 Апр 2021 16:27 #7

  • OK1RR
  • OK1RR аватар
  • Вне сайта
  • CW forever!
  • Сообщений: 38
  • Спасибо получено: 17
Rome пишет:
Hi, Pibo.
By default Linux does not allow access to USB devices, to use them (including E-Coder) you need to enter the following lines when the system starts:
sudo chmod 664 /dev/hidraw*
sudo chgrp plugdev /dev/hidraw*

This is good solution and works ... until restart!

My solution is permanent, it is an udev entry. Copy the line
KERNEL=="hidraw*", SUBSYSTEM=="hidraw", MODE="0664", GROUP="plugdev"
and save it to file
99-hidraw-permissions.rules
This file must be located in
/etc/udev/rules.d/
Ensure that you are member of the "plugdev" group. Most users already are.
73,
Martin, OK1RR
Администратор запретил публиковать записи гостям.
Спасибо сказали: S58WW, Rome, LB2EG

E-Coder on Linux 09 Июнь 2021 01:40 #8

  • KC7MM
  • KC7MM аватар
  • Вне сайта
  • Сообщений: 1
We both hit on the same solution, though with a difference. My UDEV rule identifies the /dev/hidraw device that the E-Coder is on, and sets group and permissions only for that one. It might not make any difference, but I feel more comfortable not changing them for other devices. Here's my rule:

SUBSYSTEM=="hidraw", ATTRS{idProduct}=="0003", ATTRS{idVendor}=="1fc9",
SYMLINK+="expert_ecoder", GROUP="plugdev", MODE="0664"

73,
Russ, KC7MM
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.090 секунд