Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

ТЕМА: E-Coder2 still not working with EESDR2 (or properly with EESDR3) for CW

E-Coder2 still not working with EESDR2 (or properly with EESDR3) for CW 19 Дек 2021 14:24 #1

  • danielwee
  • danielwee аватар
  • Вне сайта
  • Сообщений: 209
  • Спасибо получено: 29
EESDR2 1.3.1 Update 11
EESDR3 0.11.0 17122021

CW paddle input is still completely unusable with E-Coder2 in EESDR2. Sidetone from E-Coder2 is completely different from sidetone from the PC soundcard.

In EESDR3 it is "almost" usable but still a mess:-
1. audio and CW input is still glitchy making for unreliable sending
2. CW sidetone from PC soundcard missing last dit (but present in audio from E-Coder2). Don't know which to trust.
3. CW sidetone from PC side sometimes gets "stuck" on release (continued dits or dahs even after being released)

I have heard about some firmware update utility for the E-Coder2 but have no idea where it is available or when. Does anyone have any information on the resolution of these problems?
Администратор запретил публиковать записи гостям.

E-Coder2 still not working with EESDR2 (or properly with EESDR3) for CW 20 Дек 2021 06:39 #2

  • Rome
  • Rome аватар
  • Вне сайта
  • Quod Licet Jovi Non Licet Bovi
  • Сообщений: 1039
  • Спасибо получено: 523
That is correct, the utility for the E-Coder2 firmware update will be released before the end of the year.
Роман, Roman
Expert Electronics
Администратор запретил публиковать записи гостям.

E-Coder2 still not working with EESDR2 (or properly with EESDR3) for CW 20 Дек 2021 11:25 #3

  • danielwee
  • danielwee аватар
  • Вне сайта
  • Сообщений: 209
  • Спасибо получено: 29
Thanks Roman!!! I will wait in anticipation!
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.068 секунд