Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
In this category, you can discuss questions related to the ERS.

ТЕМА: TX Problem via Remote

TX Problem via Remote 27 Авг 2022 13:11 #1

  • DM4SH
  • DM4SH аватар
  • Вне сайта
  • Сообщений: 5
Hello everyone,
When I use Expertsdr3 via remote, I always have to turn on TX first and then press the Drive slider again to activate TX.
Is that the case with you too? Or only with me?? MFG Sven DM4SH
Администратор запретил публиковать записи гостям.

TX Problem via Remote 03 Сен 2022 00:37 #2

  • EA5CCY
  • EA5CCY аватар
  • Вне сайта
  • Сообщений: 17
  • Спасибо получено: 5
Apparently it is a software bug. The same thing happens to me with my SunSDR2 Pro. I know it has already been reported to the programmers for them to fix it.

Best regards

EA5CCY
Администратор запретил публиковать записи гостям.

TX Problem via Remote 03 Сен 2022 02:53 #3

  • N8SDR
  • N8SDR аватар
  • Вне сайта
  • Сообщений: 632
  • Спасибо получено: 302
Not here

Drive slider stays where I left it

What version and BUILD number of V3 and also what Firmware are you using


To me this sounds possibly like incorrect firmware
Please do not email me and ask for help I no longer will be part of this, If I could delete /remove my profile I would do so.
Администратор запретил публиковать записи гостям.

TX Problem via Remote 05 Сен 2022 15:38 #4

  • DM4SH
  • DM4SH аватар
  • Вне сайта
  • Сообщений: 5
Hello and thanks for the quick reply.
Firmware version on the SunSDR Pro is 72.8
PCB Revision 3.

Software
Expert SDR3
Version 0.13.0 alpha
Build: 08072022

The slider doesn't move, but when I press the MOX button, I always have to adjust the drive slider a little so that it goes on the air. If I don't adjust the Drive slider, it doesn't go to TX.

Kind regards
DM4SH Sven
Последнее редактирование: 05 Сен 2022 15:42 от DM4SH.
Администратор запретил публиковать записи гостям.

TX Problem via Remote 05 Сен 2022 16:47 #5

  • N8SDR
  • N8SDR аватар
  • Вне сайта
  • Сообщений: 632
  • Спасибо получено: 302
BING BING BING!

Incorrect outdated firmware


Start EESDR3 on the radio chooser panel click the gear icon

You need to update your firmware, for the version you listed as using the Firmware is 78.8 not 72 that is old firmware
Please do not email me and ask for help I no longer will be part of this, If I could delete /remove my profile I would do so.
Администратор запретил публиковать записи гостям.

TX Problem via Remote 08 Сен 2022 05:38 #6

  • DM4SH
  • DM4SH аватар
  • Вне сайта
  • Сообщений: 5
Hello everyone ,
I have now updated the firmware to 78.8.
But the problem is the same . If I want to broadcast via remote access by pressing the MOX button, there is no transmission power. If I then go to the drive controller and tap on it, transmission power is immediately available. The same thing happens the next time you try to send. Try making a video of it later. If I connect directly to the SunSDR without a remote, TX works wonderfully. Sincerely, Sven DM4SH
Администратор запретил публиковать записи гостям.

TX Problem via Remote 11 Сен 2022 11:07 #7

  • DM4SH
  • DM4SH аватар
  • Вне сайта
  • Сообщений: 5
Hello, it's me again.
I just made a video of the error.
I hope you can see that every time I want to send, I first have to press TX and then make a change to the drive so that the transmission power comes up.
MFG SVen



https://youtu.be/iwbp514f-_g
Последнее редактирование: 11 Сен 2022 11:20 от DM4SH.
Администратор запретил публиковать записи гостям.

TX Problem via Remote 07 Нояб 2022 09:34 #8

  • sm4ive
  • sm4ive аватар
  • Сейчас на сайте
  • CW is King VHF-SHF EME
  • Сообщений: 119
  • Спасибо получено: 15
same here to get output first press TX or Tune then move slider to get power.
MB"! Prime
Win 10pro
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.105 секунд