Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****
  • Страница:
  • 1
  • 2

ТЕМА: ESSB settings

ESSB SunSDR2PRO 06 Дек 2019 20:36 #16

  • EI9HEB
  • EI9HEB аватар
  • Вне сайта
  • Сообщений: 46
  • Спасибо получено: 15
Hi VU3ESV,
I have tested similar setup but non-ASIO driver creates massive latency in the system, and real monitoring of the audio just melts the brain :stars:

@n1mjf
How do you route the audio from RME ADI-2 Pro DAC to SUNSDR ??

Also, a similar question to other users, if you use external processing how do you route the audio to your SUNSDR ??

Regards
Pawel EI9HEB /SP9DR
How do you VooDoo?
Последнее редактирование: 06 Дек 2019 20:38 от EI9HEB. Причина: spelling correction
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 07 Дек 2019 11:47 #17

  • n1mjf
  • n1mjf аватар
  • Вне сайта
  • Сообщений: 32
  • Спасибо получено: 3
EI9HEB пишет:
Hi VU3ESV,
I have tested similar setup but non-ASIO driver creates massive latency in the system, and real monitoring of the audio just melts the brain :stars:

@n1mjf
How do you route the audio from RME ADI-2 Pro DAC to SUNSDR ??

Also, a similar question to other users, if you use external processing how do you route the audio to your SUNSDR ??

Regards
Pawel EI9HEB /SP9DR

I route my audio just as VU3ESV showed but I do not use Ableton. I will try with that software later today.

Audio.jpg
Current set up: SunSDR2 DX, HiFi audio, Alpha Delta DX-CC up 20 feet.
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 07 Дек 2019 12:14 #18

  • n1mjf
  • n1mjf аватар
  • Вне сайта
  • Сообщений: 32
  • Спасибо получено: 3
I will have to make a profile in this software now and continue setting it up. This software seems very nice. Here is the settings I used and yes, it did take making a new VAC line.


Audio1.jpg



Audio2.jpg
Current set up: SunSDR2 DX, HiFi audio, Alpha Delta DX-CC up 20 feet.
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 07 Дек 2019 13:47 #19

  • EI9HEB
  • EI9HEB аватар
  • Вне сайта
  • Сообщений: 46
  • Спасибо получено: 15
Hi all,
You can download Melda plugins from my dropbox, there is very good frequency shifter very useful for creating nice harmonics.
Also, there is an old profile called "5 charmoniczna" ( 5th harmonics) I was using for Kenwood TS870s.
But you be missing Focusrite VSTplugin compressor, gate and EQ which comes with the USB interface.
www.dropbox.com/sh/n3rae2gny96kflw/AADxAVNGEfrFWA5Eamuk154Ya?dl=0
How do you VooDoo?
Администратор запретил публиковать записи гостям.
Спасибо сказали: sv2sfg, 2E0GKG

ESSB SunSDR2PRO 10 Дек 2019 18:01 #20

  • G0VQY
  • G0VQY аватар
  • Вне сайта
  • Сообщений: 9
EI9HEB пишет:
Sorry for my spelling that was from the phone,
How do you feed the audio in to the Sun??
if it's USB that it must be plugged into the PC and then be using the PC Mike setting on the software. Sorry, I know you're not asking me but that's how I connect my USB microphones to the radio
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 10 Дек 2019 18:18 #21

  • EI9HEB
  • EI9HEB аватар
  • Вне сайта
  • Сообщений: 46
  • Спасибо получено: 15
@G0VQY Penn
Thank you for your answer, the more answers the better.
General "trend" how SUNSDR users feed the audio is a good knowledge too.
How do you VooDoo?
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 29 Дек 2019 07:23 #22

  • SP7IDX
  • SP7IDX аватар
  • Вне сайта
  • Сообщений: 1
does anyone use the SunSDR2 DX headset Arlan RS55SL, any to provide with the settings?
73, Waldi SP7IDX
sp7idx-hexbeam.eu
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 20 Авг 2020 16:48 #23

  • SM0JZT
  • SM0JZT аватар
  • Вне сайта
  • Сообщений: 4
Im trying to figure out how to configure ESSB-settinigs in my SUNSDR2 DX.


ESSB.jpg


My guess is that I change the High frequency cut in SSB to around 5kHz

What more to do besides a good microphone ?? I have a studio-mike connected with XLR to a mixer that is connected to my PC with USB.
SM0JZT - Tilman D. Thulesius
Sweden
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 15 Янв 2023 09:16 #24

  • ea5iwt
  • ea5iwt аватар
  • Вне сайта
  • Сообщений: 3
you sent the low to 80Hz no you need to set it to 20Hz not 80hz the different will be big
g0uut
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 15 Янв 2023 09:16 #25

  • ea5iwt
  • ea5iwt аватар
  • Вне сайта
  • Сообщений: 3
ea5iwt пишет:
you sent the low to 60Hz no you need to set it to 20Hz not 60hz the different will be big
g0uut
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 15 Янв 2023 09:17 #26

  • ea5iwt
  • ea5iwt аватар
  • Вне сайта
  • Сообщений: 3
as well the buffer size need to be set correctea5iwt пишет:
ea5iwt пишет:
you sent the low to 60Hz no you need to set it to 20Hz not 60hz the different will be big
g0uut
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 23 Янв 2023 11:05 #27

  • Anto66
  • Anto66 аватар
  • Вне сайта
  • Сообщений: 16
Ciao, potresti utilizzare 2 schede audio e risolvi..
Администратор запретил публиковать записи гостям.
  • Страница:
  • 1
  • 2
Время создания страницы: 0.247 секунд