Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
  • Страница:
  • 1
  • 2
  • 3
  • 4
  • 5

ТЕМА: ExpertSDR3 - First impressions

ExpertSDR3 - First impressions 07 Май 2021 23:22 #46

  • N8SDR
  • N8SDR аватар
  • Вне сайта
  • Сообщений: 193
  • Спасибо получено: 89
Bigboy пишет:
My friends are on the market for sdr radios and they're anxious to see the esdr3 software but I guess they'll be getting the new Andromeda or flex instead.

Keep in mind Flex hasn't done a single thing to fix issues like NB since there first release some years ago and there software is Stale at best- no updates in how long?

also ANAN has there issues with software as well esp. since Richie hasn't been involved in coding

While I think EE should have waited on doing a BETA at minimum instead of an ALPHA

I will say in my opinion of running several SDR rigs over the last 14 years that EE hands down has been the most stable.

And if I had to choose between the two you mentioned and those were my only choices I would go with the ANAN over a FLEX.! and their DumbSDR
73 Rick
Администратор запретил публиковать записи гостям.

ExpertSDR3 - First impressions 08 Май 2021 02:07 #47

  • VK6NX
  • VK6NX аватар
  • Вне сайта
  • Сообщений: 80
  • Спасибо получено: 36
Bigboy пишет:
My friends are on the market for sdr radios and they're anxious to see the esdr3 software but I guess they'll be getting the new Andromeda or flex instead.
:lol:
Ja ja, sehr gut. Just do not forget to post "selling my sunsdr" message in every topic when all other ideas gone :hi:
Администратор запретил публиковать записи гостям.

ExpertSDR3 - First impressions 08 Май 2021 09:15 #48

  • 3z9am
  • 3z9am аватар
  • Вне сайта
  • Сообщений: 23
  • Спасибо получено: 3
Remote is working ? or where is instruction how connect via remote ?
Администратор запретил публиковать записи гостям.

ExpertSDR3 - First impressions 08 Май 2021 16:49 #49

  • kc2rgw
  • kc2rgw аватар
  • Вне сайта
  • Сообщений: 51
  • Спасибо получено: 16
Thanks for putting this out so we can get a look at it.

Looks very nice, seems responsive, quick to launch.

I can't really test it on transmit as the ASIO driver seems missing, I can't select my microphone.

I couldn't find anywhere to set the TX filter width and I need control of that or I won't be able to control how wide I am depending on conditions and nearby traffic. There's also no way to know what range of audio response I have to work with.

For digital modes, I'll need VAC functioning to select the virtual audio cable to use with digi mode software (fldigi).

The install instructions and firmware upgrade did work properly with Win10, no issue there.

It's a good start, evidently the "pro" version is what I'll be waiting for to really use it on the air.
Администратор запретил публиковать записи гостям.

ExpertSDR3 - First impressions 08 Май 2021 18:09 #50

  • Bigboy
  • Bigboy аватар
  • Вне сайта
  • Сообщений: 22
Any words or announcement from EE guys about this launch? I read a lot here are kinda frustrated with this alpha launch instead of the beta one as announced.
Администратор запретил публиковать записи гостям.

ExpertSDR3 - First impressions 08 Май 2021 18:28 #51

  • R3IIN
  • R3IIN аватар
  • Вне сайта
  • Сообщений: 38
  • Спасибо получено: 8
DEL
Последнее редактирование: 08 Май 2021 18:41 от R3IIN.
Администратор запретил публиковать записи гостям.

ExpertSDR3 - First impressions 08 Май 2021 18:28 #52

  • R3IIN
  • R3IIN аватар
  • Вне сайта
  • Сообщений: 38
  • Спасибо получено: 8
1 poor graphics rendering frequency display indicator ( panorama) and digital scale
2 no execution of the TX command from the pedal (from the tangent )
3 no low-frequency signal at the modulator input ( when VAC Mic2 MIC1 is turned on)
4 There is no adjustment of the filter bandwidth and the squareness factor TX USER
5 the audio analyzer does not work !!!
6 The absence of control switching after the TX filter and microphone amplifier
7 no additional arrow indicator ( which will not be changed and will work like a candy bar). )
AND THIS IS A SMALL PART!!!! :evil: :evil: :evil:
P/S the manufacturer left the Rotator function , and how to configure it ? it is necessary to maintain the function of the oscilloscope with the ability to measure changes in time characteristics
Последнее редактирование: 08 Май 2021 18:37 от R3IIN.
Администратор запретил публиковать записи гостям.

ExpertSDR3 - First impressions 09 Май 2021 02:20 #53

  • VK6NX
  • VK6NX аватар
  • Вне сайта
  • Сообщений: 80
  • Спасибо получено: 36
R3IIN пишет:
...
en.wikipedia.org/wiki/Software_release_life_cycle#Alpha
R3IIN пишет:
..
AND THIS IS A SMALL PART!!!! :evil: :evil: :evil:
Good. Thanks for finding it. Now please use bug report tool to let developers know.
Администратор запретил публиковать записи гостям.

ExpertSDR3 - First impressions 09 Май 2021 06:59 #54

  • S58WW
  • S58WW аватар
  • Вне сайта
  • A half-truth is the most cowardly of lies.
  • Сообщений: 118
  • Спасибо получено: 31
Bigboy пишет:
Any words or announcement from EE guys about this launch? I read a lot here are kinda frustrated with this alpha launch instead of the beta one as announced.
Weekend and holidays in Russia (9th may - Victory Day).
Have some respect please. :yes:
We are talking about hobby here.
Regards to all.
73 Pibo S58WW
2 X SUNSDR2pro
Main shack PC:
AMD RYZEN 7 2700 (8 cores ; 16 threads) 32 GB RAM
on Gigabyte Aorus Elite B450 with 1TB and 250 GB INTEL NVMe M.2
NVIDIA GeForce GTX 1660 SUPER
Администратор запретил публиковать записи гостям.

ExpertSDR3 - First impressions 09 Май 2021 11:29 #55

  • EI9HEB
  • EI9HEB аватар
  • Вне сайта
  • Сообщений: 127
  • Спасибо получено: 36
There is no point to show your frustration in here no one is forced to use it.
Just run your previous version and enjoy it as before.
Or put the radio for sale ( just let us know when and where )
I would buy another one for sure.
How do you VooDoo?
Администратор запретил публиковать записи гостям.

ExpertSDR3 - Primeras impresiones 09 Май 2021 18:20 #56

  • K0PJ
  • K0PJ аватар
  • Вне сайта
  • Сообщений: 39
  • Спасибо получено: 5
Unfortunately, the Hams on the fence evaluating a new radio will be steered away from EE MB1 because of this missed opportunity. I'm a strong supporter, and added a new CPU, 32 GB memory and a new SSD hoping all of that would pay off for SDR3. From experience of the past few years, it appears a usable SDR3 may take 1-2 years. Full Duplex was offered in 2016 as well as remote access....and other features.
Greg K0PJ/9
Master Brewer & DXer
Администратор запретил публиковать записи гостям.
Спасибо сказали: ON5MF, R3IIN, ccruiser

ExpertSDR3 - First impressions 10 Май 2021 06:23 #57

  • SM0JZT
  • SM0JZT аватар
  • Вне сайта
  • Сообщений: 78
  • Спасибо получено: 7
Would be interesting what one is to expect from the SW release.

It is a Alpha for sure. So I do not want to cover missfeatures that arent supported now.
So far:
  • No TX at all
  • Client software looses connection with occasionally with rig

Would be handy to have some sort of users manual so that one is looking for the right features.....
SM0JZT - Tilman D. Thulesius
Sweden
Администратор запретил публиковать записи гостям.

ExpertSDR3 - First impressions 10 Май 2021 17:33 #58

  • kc2rgw
  • kc2rgw аватар
  • Вне сайта
  • Сообщений: 51
  • Спасибо получено: 16
Another heads up for people. It *may* just be me, but in the transition of the firmware update process and then going back to using v8 that also required the firmware be switched back, along the way the frequency calibration got reset to 00000. If you find yourself off frequency, just do a recalibration.

For those with VAC set up for using fldigi, I found this (link below) to be a very easy way to do frequency calibration and it gets me down to within 1Hz. I used to do it by ear by zero beating a side tone with WWV or by switching LSB to USB and matching the beat tones there by ear. This way you can just use your eyes if you don't hear intonation well enough. By ear I would get to within 2Hz or so but only after spending a good while mucking with it.

www.wb1gof.org/files/UsingFldigiForRigCalibrationAndFrequencyMeasurement.pdf
Администратор запретил публиковать записи гостям.
Спасибо сказали: N1KIN

ExpertSDR3 - First impressions 11 Май 2021 14:58 #59

  • N1KIN
  • N1KIN аватар
  • Вне сайта
  • Сообщений: 19
  • Спасибо получено: 9
I used to do the same until I realized another method that is far faster. Set RX mode instead to DSB while tuned into a strong WWV signal. You can hear a "warble" in the carrier tone generated as you rock the VFO back and forth on either side of say 10.000.000 Hz. I adjust the calibration offset up or down to yield the same "error" warble on each side of the center freq. You know you have it properly zero-beat when you can hear the identical warble in the tone as you go just 1 or 2 Hertz up and down on either side of "0", and no warble when on dead center. This quick by-ear method gets you within 1 Hz or less, and without having to switch modes back and forth from USB to LSB as before... Give it a try! :music:
Администратор запретил публиковать записи гостям.
Спасибо сказали: kc2rgw

ExpertSDR3 - First impressions 11 Май 2021 18:53 #60

  • iw7dmh
  • iw7dmh аватар
  • Вне сайта
  • Сообщений: 205
  • Спасибо получено: 102
Hello,

now that Expert Team is again at work, I received some feedback about issues I highlighted on the official support page.

1- The error "There are other ExpertSDR3 instance running" isn't an error. The message it is due to the new concept of "Device Manager". After running a EESDR3 instance, if you close the device manager, it actually stay minimized in the try bar. You can close it definitively with right-click -> Quit or you can resume with right-click -> Show on the same icon.

2- CW Pitch doesn't work. It will be released in a future V3 version.

3- NB does mute the receiver whichever settings I have on Threshold and Pulse width slider. It seem's to be a bug.

4- Unable to change TCI Port and/or Audio Interface - I have to disable the bottom right icons before I can change settings.

5. Unable to close NF+ filters. The way to close the the NF+ filter is changed. Ihave to click on the wheel button instead of the double mouse right click.

Maybe this can help someone that would like to continue testing.

73' iw7dmh

MultipleInstance2.jpg


MultipleInstance.jpg
Последнее редактирование: 11 Май 2021 18:54 от iw7dmh.
Администратор запретил публиковать записи гостям.
Спасибо сказали: Rome
  • Страница:
  • 1
  • 2
  • 3
  • 4
  • 5
Время создания страницы: 0.241 секунд