Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
  • Страница:
  • 1
  • 2

ТЕМА: expert sdr 3

expert sdr 3 07 Май 2021 14:43 #1

  • ilias
  • ilias аватар
  • Вне сайта
  • Сообщений: 3
I don’t understand ptt not working!!!
Where is tx filter bandwidth
When I try close the program and and I try to open it again
Warning appear and say that there is an other sdr
What I am missing?
Администратор запретил публиковать записи гостям.

expert sdr 3 07 Май 2021 15:01 #2

  • M0CVX
  • M0CVX аватар
  • Сейчас на сайте
  • Сообщений: 39
  • Спасибо получено: 5
As for the programme not shutting fully: a few of us have noticed that, and I have submitted a bug report. In the mean time, after you have closed SSDR3 you can go to Task Manager in Windows and shut it down there.

Paul M0CVX
Администратор запретил публиковать записи гостям.
Спасибо сказали: ilias

expert sdr 3 07 Май 2021 15:05 #3

  • g0cgl
  • g0cgl аватар
  • Вне сайта
  • Erik EI4KF / G0CGL
  • Сообщений: 1189
  • Спасибо получено: 472
Don't forget there is a new way to start it now. The radio chooser is what you are launching. If you try it again you will get an error. After closing ESDR3, go back to the chooser to re-start the SDR software. This is explained in the pre-launch videos. Of course you could be seeing a different problem.
Администратор запретил публиковать записи гостям.
Спасибо сказали: M0CVX

expert sdr 3 07 Май 2021 15:25 #4

  • M0CVX
  • M0CVX аватар
  • Сейчас на сайте
  • Сообщений: 39
  • Спасибо получено: 5
Good point, Erik...I forgot that
Администратор запретил публиковать записи гостям.

expert sdr 3 07 Май 2021 15:29 #5

  • ilias
  • ilias аватар
  • Вне сайта
  • Сообщений: 3
thanks you!!
Администратор запретил публиковать записи гостям.

expert sdr 3 07 Май 2021 16:54 #6

  • lz2aov
  • lz2aov аватар
  • Вне сайта
  • LZ2AOV-M0AOV-TA4ZN
  • Сообщений: 48
  • Спасибо получено: 2
Anyone had this when starting SDR3 software, installed everything checked the firewall everything looks ok there started the front loader software and found my sunsdr2dx as 192.168.16.198:50001 so i press start and the software loads up i then press start on the software and I get ( LOST CONNECTION WITH SUNSDR2DX! ) anyone else had this problem??? not sure if it's anything dto do with the port 50001 ??? nothing else in the setting to change from what I can see.

Thanks for any reply to get the radio to turn on

GOT THIS SORTED GUY'S it was still a FIREWALL problem even though I had turned them off I restarted the PC and then turned them back on and then back off they atarted to work.

this might help someone else
Here to enjoy Ham Radio
LZ2AOV/M0AOV/TA4ZN
Последнее редактирование: 07 Май 2021 17:07 от lz2aov.
Администратор запретил публиковать записи гостям.

expert sdr 3 07 Май 2021 17:23 #7

  • DD5MD
  • DD5MD аватар
  • Вне сайта
  • Сообщений: 35
  • Спасибо получено: 11
On macOS I have tried everything but no chance to get ExpertSDR3 to run. The software opens but nothing more. Very unfamiliar and cumbersome in terms of settings the new interface. I prefer to wait for a version that can also update the firmware.
Администратор запретил публиковать записи гостям.

expert sdr 3 07 Май 2021 19:51 #8

  • Iu4jnr
  • Iu4jnr аватар
  • Вне сайта
  • Сообщений: 10
In my case the launcher is hidden and even the icon is in the tray it want to start again. The only solution is to kill through the task manager.
Max IU4JNR
Администратор запретил публиковать записи гостям.

expert sdr 3 09 Май 2021 17:58 #9

  • K0PJ
  • K0PJ аватар
  • Вне сайта
  • Сообщений: 39
  • Спасибо получено: 5
I finally got SDR3 to briefly work. No PTT for SSB, but I was able to send CW. Is there an options menu? The rate of panadaptor change nearly sent me into a seizure (similar to the old JA cartoons that had the same effect). Also, none of my radio controls work.......
Greg K0PJ/9
Master Brewer & DXer
Администратор запретил публиковать записи гостям.

expert sdr 3 25 Май 2021 09:06 #10

  • sm4ive
  • sm4ive аватар
  • Вне сайта
  • CW is King VHF-SHF EME
  • Сообщений: 61
  • Спасибо получено: 7
When could we expect a working version? at least buttons and VFO, as off now not much use ´.CW does not work (only with firmware 9, but then ESDR 2 does not work in cw so not much use of that FW upgrade.
Администратор запретил публиковать записи гостям.

expert sdr 3 25 Май 2021 09:51 #11

  • VK6NX
  • VK6NX аватар
  • Вне сайта
  • Сообщений: 80
  • Спасибо получено: 36
Basing on previous experience, typical EE's software release roadmap (from Alpha to Release) fits into 6-8 months timeframe.
Within given period we may expect few versions of Beta (typically 4-5) and RC (up to 9).

Roman said earlier, that ESDR3 development is almost twice faster comparing to ESDR2, due to newer framework. However, developers have to practically re-create all ESDR2 feature set from ESDR2 into ESDR3, and work on enhancements at the same time. So do not expect this to be speedy wheels.
Последнее редактирование: 25 Май 2021 09:52 от VK6NX.
Администратор запретил публиковать записи гостям.
Спасибо сказали: Rome

expert sdr 3 25 Май 2021 11:22 #12

  • Rome
  • Rome аватар
  • Сейчас на сайте
  • Quod Licet Jovi Non Licet Bovi
  • Сообщений: 832
  • Спасибо получено: 365
New alpha with bug fixes and a couple of new functions will be available until the end of June.
We'll add E-Coder support, DSP for TX filter, support of the MB1 front panel, PTT, and most likely some other features along the way.
Роман, Roman
Expert Electronics
Администратор запретил публиковать записи гостям.
Спасибо сказали: F6CTT, John-KC2QMA

expert sdr 3 25 Май 2021 19:13 #13

  • yo7cvl
  • yo7cvl аватар
  • Вне сайта
  • cucubau
  • Сообщений: 9
  • Спасибо получено: 2
I own a SunSDR2DX and Expert 1.3 K PA. I am very interested in ALC so that the two equipments can work correctly in tandem.
I tried to limit the power in the software but there are still some peaks that give the input override error for PA (even if I set the input power for an output power to 60%).

I also tested the QRO with Icom7300 and FT DX 3000 and it works perfectly, without the "over driving input" error, even if the input power of the transceiver is at 100%.

I look forward to implementing ALC in ExpertSDR3, as you promised.
PozacuALCpentruforum.png
Последнее редактирование: 25 Май 2021 19:18 от yo7cvl.
Администратор запретил публиковать записи гостям.
Спасибо сказали: ON5MF

expert sdr 3 26 Май 2021 19:37 #14

  • N8SDR
  • N8SDR аватар
  • Вне сайта
  • Сообщений: 193
  • Спасибо получено: 89
yo7cvl пишет:
I own a SunSDR2DX and Expert 1.3 K PA. I am very interested in ALC so that the two equipments can work correctly in tandem.
I tried to limit the power in the software but there are still some peaks that give the input override error for PA (even if I set the input power for an output power to 60%).

I also tested the QRO with Icom7300 and FT DX 3000 and it works perfectly, without the "over driving input" error, even if the input power of the transceiver is at 100%.

I look forward to implementing ALC in ExpertSDR3, as you promised.
PozacuALCpentruforum.png

The Output DRIVE NOPR the TUNE power sliders are LINEAR BY ANY MEANS

if your thinking 60% is roughly 60 watts that is not the case!
Also bear in mind that ALC is NOT A UNIVERAL SETTING, every manufacture has Different settings regarding ALC there is No set standard
this is why ACOM does not fool with ALC
73 Rick
Администратор запретил публиковать записи гостям.
Спасибо сказали: Rome

expert sdr 3 27 Май 2021 18:46 #15

  • yo7cvl
  • yo7cvl аватар
  • Вне сайта
  • cucubau
  • Сообщений: 9
  • Спасибо получено: 2
Dear Richard,
I was talking about 60% of 1k3. I don't know where you got 60W?
I also greet Roman who thanked you.

73 de Miki, YO7CW (ex YO7CVL) !
Последнее редактирование: 27 Май 2021 18:55 от yo7cvl.
Администратор запретил публиковать записи гостям.
Спасибо сказали: Rome
  • Страница:
  • 1
  • 2
Время создания страницы: 0.373 секунд