Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
Please discuss anything related to the ExpertSDR3 and the ERS (Expert Remote System) here.

ТЕМА: Thanks for the New V3 category

Thanks for the New V3 category 19 Авг 2022 10:43 #1

  • N8SDR
  • N8SDR аватар
  • Вне сайта
  • Сообщений: 632
  • Спасибо получено: 302
Thanks, EE, for the new EESDR3 category

This will make things easier to find regarding V3 related topics
Please do not email me and ask for help I no longer will be part of this, If I could delete /remove my profile I would do so.
Администратор запретил публиковать записи гостям.
Спасибо сказали: Rome, John-KC2QMA, W3FRG

Thanks for the New V3 category 04 Сен 2022 12:44 #2

  • Steve
  • Steve аватар
  • Вне сайта
  • G0OGS
  • Сообщений: 7
Hi
I recently downloaded the latest Sdr3 software to Mac running Big Sir OS, the spectrum is totally erratic so unusable?

Regards Steve
Администратор запретил публиковать записи гостям.

Thanks for the New V3 category 04 Сен 2022 16:43 #3

  • N8SDR
  • N8SDR аватар
  • Вне сайта
  • Сообщений: 632
  • Спасибо получено: 302
Steve пишет:
Hi
I recently downloaded the latest Sdr3 software to Mac running Big Sir OS, the spectrum is totally erratic so unusable?

Regards Steve

I would be willing to say you have not upgraded the firmware.
Almost everyone that has the issue you mention has NOT Upgraded the firmware

please show a picture of the firmware code?
Please do not email me and ask for help I no longer will be part of this, If I could delete /remove my profile I would do so.
Администратор запретил публиковать записи гостям.

Thanks for the New V3 category 04 Сен 2022 18:06 #4

  • Steve
  • Steve аватар
  • Вне сайта
  • G0OGS
  • Сообщений: 7
HI Rick

Ive got 0.13.0 alpha Build 08072022 but even when i go into the firmware manager the prepare screen pops up but just sits there.
Администратор запретил публиковать записи гостям.

Thanks for the New V3 category 04 Сен 2022 22:09 #5

  • N8SDR
  • N8SDR аватар
  • Вне сайта
  • Сообщений: 632
  • Спасибо получено: 302
Steve пишет:
HI Rick

Ive got 0.13.0 alpha Build 08072022 but even when i go into the firmware manager the prepare screen pops up but just sits there.

Have you tried to remove power from back of radio (pull out the Anderson power plug) with radio off, let it sit for a minute

then plug it back in, and restart the radio and the application- see then if you Goto the firmware panel click the gear icon, what happens?

if it still hangs after a about 3 minutes (not before) - power off radio - then reboot PC - power back on and relaunch application - see if firmware starts to install then.
Please do not email me and ask for help I no longer will be part of this, If I could delete /remove my profile I would do so.
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.107 секунд