Svante пишет:
How are your setup with stationar computers ?
Same way as you set up any laptop with simultaneous direct cable to SunSDR and wifi (for you internet). In absolute majority of the potential scenarios you just need to follow couple of directions:
1. Direct cable ethernet port is recommended (in most scenarious):
- to be on separate IP range (you may use either EE default from 192.168.16.0/24, or any other from RFC1918 range)
- leave Default GW and DNS fields blanc
- set port priority to highest (or at least above Internet ethernet port)
3. On Internet ethernet port (or WiFi):
- separate IP range (i.e. 192.168.1.0/24 or any other from RFC1918 range) with default GW and DNS
- set port priority lower than direct cable ethernet
Typical mac dual LAN setup: