Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

ТЕМА: synchro receivers MB-1

synchro receivers MB-1 20 Июнь 2016 00:19 #1

  • alain
  • alain аватар
  • Вне сайта
  • Сообщений: 24
  • Спасибо получено: 1
Good evening,

Is it possible to synchronize the two receptors MB-1 for making "diversity receiver"
EME very useful ?
is that the two receivers may have separate inputs ?
Thank you
Alan
Последнее редактирование: 20 Июнь 2016 00:22 от alain. Причина: fault
Администратор запретил публиковать записи гостям.

synchro receivers MB-1 20 Июнь 2016 09:03 #2

  • eeadminexpert
  • eeadminexpert аватар
  • Вне сайта
  • Сообщений: 38
  • Спасибо получено: 5
Dear Alan.
MB1 has 1 ADC and two separate software receivers, but not physical receivers which is required for EME and "diversity receiver".
Администратор
Expert Electronics
Администратор запретил публиковать записи гостям.

synchro receivers MB-1 22 Апр 2017 15:19 #3

  • NI0Z
  • NI0Z аватар
  • Вне сайта
  • Сообщений: 55
  • Спасибо получено: 14
Could you make a facility where someone can add one of your Colabri receivers hooked to a second antenna to provide diversity? This would be a huge win for Expert Electronics both financially and reputation wise. A great selling benefit for those that don't want to spend the extra money verses those willing to pay extra. Optionally IQ from a second external receiver could be fed in to reduce processing loads.

Just a few thoughts, you could make more Colabri sales that way!
73
73
NI0Z
Последнее редактирование: 22 Апр 2017 15:20 от NI0Z.
Администратор запретил публиковать записи гостям.

synchro receivers MB-1 15 Май 2017 05:44 #4

  • VassiL
  • VassiL аватар
  • Вне сайта
  • Разработчик SDR-техники, Developer of SDR
  • Сообщений: 1299
  • Спасибо получено: 247
Now it's possible to use any our devices in syncronous mode with MB1. All our devices can be syncronized(Freq, mode, RX bandwidth, RIT etc) between each other via ExpertSync utility. But each device should be used with own ExpertSDR2 software. It's interesting to use different devices with one software for diversity or other tasks, but in our plans to add two last main functions (ALC, Transverter mode), after it will be implemented Full duplix, predistortion... May be on this stage we will try to add additional hardware control from one software. It's interesting.
Василий, Vasily,
Expert Electronics
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.143 секунд