Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

ТЕМА: Power output on SDR2 DX

Power output on SDR2 DX 01 Дек 2019 12:35 #1

  • GM4FDM
  • GM4FDM аватар
  • Вне сайта
  • Сообщений: 2
Hi there, just got my radio this week and had a hard job getting it to tun, but it is now running very nicley after I sorted out the IP business. However this morning I decided to fire it up on CW. Power control set to max, voltage 13.8, antenna SWR on 20m 1.2:1 (Only got antenna for 20m) and the power output on key down is slightly less than 10w accoding to the software powere meter top right. I danot have an external power meter available. Is this power level DC or rms and surely it should show a higher level than 10w peak?

Tom
GM4FDM
Администратор запретил публиковать записи гостям.