Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
This category was created to discuss various questions and topics regarding ExpertSDR3 operation.

ТЕМА: Spot on EESDR3

Spot on EESDR3 17 Сен 2022 05:19 #1

  • XV9BPO
  • XV9BPO аватар
  • Вне сайта
  • Сообщений: 21
  • Спасибо получено: 1
Hi all,

I have a question related to the spots on the screen of EESDR3.
First I am running v3 0.13.0 build 02092022.

I have tried with SDC sending to pan directly and also tried with Log4OM with the option to send spots on the EESDR3 but I have the same behavior with both which is that the spots disappears only after a few minutes sometimes a few seconds.

The option in EESDR3 is set to the maximum (limit of 200 spots and lifetime 20 minutes).

If anyone could also explain the broadcast data option, I tried to get the spots from N1MM with the port matching the port in N1MM (12060) but nothing appears in EESDR3.

Thanks a lot for your help.
Администратор запретил публиковать записи гостям.

Spot on EESDR3 17 Сен 2022 11:40 #2

  • VE3EY
  • VE3EY аватар
  • Вне сайта
  • Сообщений: 31
  • Спасибо получено: 7
I think broadcast data option is used by SDC to set the colors in panorama based on their status in N1MM+ (new band, new mult,worked before etc). It must be enabled from both SDC (Telnet Server tab) and N1MM+ (Broadcast data). Once N1MM+ starts communicating with SDC, the blue arrows will be all active indicating successful data sharing.


2022-09-1707_30_45-Configurer.jpg


sdc.jpg


The spots from SDC to EESDR3 are sent via TCI and it depends how you configure your DX Cluster sources. Normally SDC connects to the DX Cluster of your choice and then acts as a 'hub' to feed spots to N1MM+ via Telnet and to EESDR3 via TCI.
Администратор запретил публиковать записи гостям.

Spot on EESDR3 19 Сен 2022 15:29 #3

  • XV9BPO
  • XV9BPO аватар
  • Вне сайта
  • Сообщений: 21
  • Спасибо получено: 1
Thanks a lot for your reply. It helps a bit with N1MM but still have this issue with the spots disappearing quickly.
I will dig in further.

Thanks again for your time
Администратор запретил публиковать записи гостям.

Spot on EESDR3 19 Сен 2022 15:35 #4

  • N8SDR
  • N8SDR аватар
  • Вне сайта
  • Сообщений: 632
  • Спасибо получено: 302
You also should that port as well in the Band Data ports in EESDR3 as well
Please do not email me and ask for help I no longer will be part of this, If I could delete /remove my profile I would do so.
Администратор запретил публиковать записи гостям.

Spot on EESDR3 22 Сен 2022 15:51 #5

  • XV9BPO
  • XV9BPO аватар
  • Вне сайта
  • Сообщений: 21
  • Спасибо получено: 1
Thanks to both of you.
I use Log4OM, the spots comes well from Log4OM but do not stay long anyway.
Thanks
Администратор запретил публиковать записи гостям.

Spot on EESDR3 26 Сен 2022 02:15 #6

  • k2kxk
  • k2kxk аватар
  • Вне сайта
  • Сообщений: 7
As far as I can see from the TCI. documentation, there is no duration sent with the spot to eesdr3 (as there is in the Flex API for example). Maybe Ed can comment on whether this is a constant value or if the spot appears until it is deleted by another TCI command.
Администратор запретил публиковать записи гостям.

Spot on EESDR3 16 Окт 2022 20:20 #7

  • k2kxk
  • k2kxk аватар
  • Вне сайта
  • Сообщений: 7
So no one has replied in a while so does anyone know how to alter the persistence of the spots coming from Log4OM. There is a setting for the cluster spots in Log4OM but mine is set to 60 minutes. The spots don't last that long.
Администратор запретил публиковать записи гостям.

Spot on EESDR3 16 Окт 2022 22:35 #8

  • Tom W3FRG
  • Tom W3FRG аватар
  • Вне сайта
  • Сообщений: 116
  • Спасибо получено: 15
I am using Log4OM and the spots last for 10 min as set on the SPOT Limit and Lifetime selection screen.
Mine is set to Limit = 200 and Lifetime = 10 min.
The spot will last bright red for 50% of the selected time and then fade and finally disappear at 10 min.
There are no color selections available on the alpha at this time, as far as I can see.

GL Tom W3FRG
Администратор запретил публиковать записи гостям.

Spot on EESDR3 17 Окт 2022 03:31 #9

  • Svante
  • Svante аватар
  • Вне сайта
  • Сообщений: 49
  • Спасибо получено: 7
Color is setting in Log4om
de sm6usu Svante
sm6usu
Администратор запретил публиковать записи гостям.
Спасибо сказали: Tom W3FRG

Spot on EESDR3 26 Окт 2022 16:05 #10

  • XV9BPO
  • XV9BPO аватар
  • Вне сайта
  • Сообщений: 21
  • Спасибо получено: 1
I do not have the same behavior, from Log4OM sometimes the spot disappear within a few minutes while my setting is set to 200 and 20 minutes.
I also have no change of color nor fading.
Using last Log4OM and last EESDR v3
Администратор запретил публиковать записи гостям.

Spot on EESDR3 30 Окт 2022 16:17 #11

  • NR4A
  • NR4A аватар
  • Вне сайта
  • Сообщений: 6
  • Спасибо получено: 2
Im still running SDR2 update 11 and noticed spots used to remain for 15 or more minutes, Within the last couple of weeks they persist on the screen for anywhere between 30 seconds to about 2 minutes maximum

I have lifetime set for 30 minutes with maximum spots set for 50. Something has changed.
Администратор запретил публиковать записи гостям.

Spot on EESDR3 29 Нояб 2022 21:16 #12

  • iw7dmh
  • iw7dmh аватар
  • Вне сайта
  • Сообщений: 251
  • Спасибо получено: 118
Hi,

it usually happens when your dx cluster node sends a lot of spots. I remember EESDR stores a maximum of 200 calls independently from the band.
This make the internal list is filled by spots that aren't visible because they are on other bands, and when new calls arrive the older ones are deleted even if their lifetime isn't off.
This problem was pointed up some years ago but I suppose that logic wasn't changed since then.
Some software, like 5MContest, implemented a workaround for this issue: it sends to ESSDR only the spot in the current band and it is enough to work them all during their lifetime.
I hope my explanation is understandable

73' Enzo
iw7dmh

5MContest_sameband_spots.jpg
Администратор запретил публиковать записи гостям.
Спасибо сказали: Rome, NR4A

Spot on EESDR3 29 Нояб 2022 23:13 #13

  • NR4A
  • NR4A аватар
  • Вне сайта
  • Сообщений: 6
  • Спасибо получено: 2
This makes perfect sense Enzo

Thank you for your detailed explanation!

73,
Sam /NR4A
Администратор запретил публиковать записи гостям.
Спасибо сказали: iw7dmh
Время создания страницы: 0.114 секунд