Добро пожаловать, Гость
Логин: Пароль: Запомнить меня

ТЕМА: SunSDR2DX update 9 - no power output through remote client/serve apps

SunSDR2DX update 9 - no power output through remote client/serve apps 24 Июль 2021 09:46 #1

  • Petrasco
  • Petrasco аватар
  • Вне сайта
  • OK1FCJ-OL8R
  • Сообщений: 4
  • Спасибо получено: 1
Hello ,
I have an issue with the latest update, version 9. Previously I was using version 8. I do have 2 SUNSDR2DX—one at the local QTH another at the remote QTH.

What I done
I upgraded to the latest version of ExpertSDR2 x64 v.1.3.1 Update9_SunSDR2_DX
radio firmware has an upgrade too.
I made the same procedure at home and the remote location.
I test locally and through TeamViewer ExpertSDR2 apps at both location works excellent with an update 9

Issue
when I use remote applications ExpertRS x64 0.6.6 on the server (remote location) and ExpertRC 1.3.0 Update1 locally, I have no power output. PTT works, the rest of the application seems too.

I suppose the issue could be with the new CW core at update 9. Could you please advise how to proceed? Shall I back downgrade the remote location to update 8?
I reinstalled all EESDR related software multiple times with Microsoft redistributable core. Always I got the same result, and I cant use remote server/client with update 9.

I look forward to your comments.

Best regards/73
Petr
Администратор запретил публиковать записи гостям.

SunSDR2DX update 9 - no power output through remote client/serve apps 14 Окт 2021 04:35 #2

  • sm4ive
  • sm4ive аватар
  • Вне сайта
  • CW is King VHF-SHF EME
  • Сообщений: 79
  • Спасибо получено: 10
Petr
i had the same issue i downgraded to update 8 on my MB1 now i have power out.
73 Lars SM4IVE
tested again update to update 9 but did ignore firmware update and that worked = Power out OK
but no good solution it just proves that firmware are not OK
Последнее редактирование: 14 Окт 2021 05:18 от sm4ive.
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.069 секунд