HI All, here is another problem with my COLIBRINano. SPLIT use or better activating VFO_B gives no audio of both VFOs.
My rig is an FT1000mkV, as CAT am using OMNIRig and CAT interface is MICROHAM_MicroKeyer.
The audio from the RX goes directly to the pc's input line, not using the audio settings of the MicroKeyer.
All works ok.
Now when I switch-ON the SUB_RX in EESDR panel the second tuning bar appears and runs up&down following the
VFO_B tuning knob, but.... NO AUDIO from EESDR either from VFO_B and VFO_A is OFF , not muted.
The commands B->A , A->B, B<->A are ok.
The TRX audio is ok from both VFOs ....
a pic-crop of my EESDR sound card setting is attached.
Any suggestion please ?
73
Phil IC8POF