Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
In this category you can discuss how to connect a third party software (loggers, CW Skimmer etc.) or devices to ExpertSDR3.

ТЕМА: Making the leap to MSHV, need a little config help

Making the leap to MSHV, need a little config help 01 Дек 2022 12:07 #1

  • W1SPS
  • W1SPS аватар
  • Вне сайта
  • Сообщений: 28
  • Спасибо получено: 6
Hey all,
I was always a WSJT-x user, however they have been slow to add TCP. I tried JDTX and it works, I just never cared for it. I've had a few people suggest MSHV so I thought I'd give that a whirl. Currently I'm using eesdr3 beta. I use Log4OM, Gridtracker, JTAlert and now MSHV.

I have the audio in MSHV set to TCI input and output. I have JTAlert set to launch all the programs when started. Although I get an error that the audio is configured wrong until MSHV starts and I tell it to connect and it starts decoding (which it does). I cannot get JTAlert to show the connections or gridtracker to connect. I didn't bother with Log4OM since the other two weren't working.I suppose it's just the different wording of things and different locations for setting that's throwing me.

If someone has all the UDP setting to make these 4 programs work together I'd really appreciate it. I just find the whole UDP thing confusing as heck.
Администратор запретил публиковать записи гостям.

Making the leap to MSHV, need a little config help 01 Дек 2022 13:43 #2

  • VK6NX
  • VK6NX аватар
  • Вне сайта
  • Сообщений: 249
  • Спасибо получено: 197
W1SPS пишет:
If someone has all the UDP setting to make these 4 programs work together I'd really appreciate it.

I wonder what exactly "UDP settings" mean :sorry:
Администратор запретил публиковать записи гостям.

Making the leap to MSHV, need a little config help 01 Дек 2022 16:01 #3

  • W1SPS
  • W1SPS аватар
  • Вне сайта
  • Сообщений: 28
  • Спасибо получено: 6
The UDP server port settings that pass stuff between the third party programs. Or did I say something wrong?
Администратор запретил публиковать записи гостям.

Making the leap to MSHV, need a little config help 01 Дек 2022 22:50 #4

  • W1SPS
  • W1SPS аватар
  • Вне сайта
  • Сообщений: 28
  • Спасибо получено: 6
Ok I got MSHV working but I have 2 issues as far as I can tell.
1. When it logs the contact info in Log4OM in the "Comment" section is just says "Auto Login". When it usually would say something like: "FT8 Sent:-06 Rcvd:+09" and it doesn't promt for the power used.

2. Cant get gridtracker to do anything.

I think that's it.
Администратор запретил публиковать записи гостям.

Making the leap to MSHV, need a little config help 02 Дек 2022 07:22 #5

  • tomas
  • tomas аватар
  • Вне сайта
  • Сообщений: 44
  • Спасибо получено: 3
Hi, Im in the same situation and finally went for JTDX.
Gridtracker can pass thrugh UDP from general settings (on another port) to your log prgm.

I have now managed to get JTDX, Gridtracker and Cqrlog to work this way.
Администратор запретил публиковать записи гостям.

Making the leap to MSHV, need a little config help 02 Дек 2022 10:02 #6

  • lz2hv
  • lz2hv аватар
  • Вне сайта
  • Сообщений: 6
  • Спасибо получено: 3
To W1SPS
"Comment" section is just says "Auto Login".
Turn auto comments to off

mshv_comm_off.png
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.105 секунд