Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

ТЕМА: ExpertSDR2

ExpertSDR2 21 Окт 2016 07:59 #61

  • g0cgl
  • g0cgl аватар
  • Вне сайта
  • Erik EI4KF / G0CGL
  • Сообщений: 784
  • Спасибо получено: 301
There is no automatic way to completely do that - some has to be manual. Obviously you know how to uninstall ESDR2 from Windows Settings > System > Add/Remove programs. Manually delete any folders that remain in Program Files (x86), and from users/MB1/AppData/Local and especially from users\MB1\ExpertSDR2.

Open the registry editor and search only for expertsdr2: delete these keys ( there will be 100+ probably).

Reboot.

Please note that the above answers your question but is more than required per Expert Electronics user instructions. Normally the installation of a ESDR2 version is accomplished only by the 1st step above i.e the uninstall of the old version via Add/Remove programs.
Администратор запретил публиковать записи гостям.
Спасибо сказали: VassiL

ExpertSDR2 21 Окт 2016 15:27 #62

  • aureliandan
  • aureliandan аватар
  • Вне сайта
  • Сообщений: 97
  • Спасибо получено: 14
I've done all that, cleaned all folders, registry, reinstalled ExpertSDR, reinstalled N1MM but the same issue, ExpertSDR2 freeze at a couple of seconds after N1MM is started.
I've checked also with DXLog.net contest software and the same behavior, it means this should be something with ExpertSDR2 software.
Could do such a damage installing the new version over the old one ?
There are no errors in N1MM logs, just the message The radio1 stop working ...
Windows Event viewer:
The program ExpertSDR2.exe version 1.1.3.24 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: b4
Start Time: 01d22b759be0d067
Termination Time: 16
Application Path: C:\Program Files (x86)\ExpertElectronics LLC\ExpertSDR2 SunSDR2\ExpertSDR2.exe
Fault bucket , type 0
Event Name: AppHangB1
Response: Not available
Cab Id: 0

Problem signature:
P1: ExpertSDR2.exe
P2: 1.1.3.24
P3: 5807773a
P4: 7771
P5: 0
P6:
P7:
P8:
P9:
P10:

Is it possible to use ExpertSDR 1.1.2 with the current upgraded firmware in SunSDR2 PRO ?
Now I ran out of ideas ... :(
Администратор запретил публиковать записи гостям.

ExpertSDR2 21 Окт 2016 15:37 #63

  • g0cgl
  • g0cgl аватар
  • Вне сайта
  • Erik EI4KF / G0CGL
  • Сообщений: 784
  • Спасибо получено: 301
I have asked Vassily to look at your report of the issue.
Администратор запретил публиковать записи гостям.

ExpertSDR2 21 Окт 2016 15:43 #64

  • aureliandan
  • aureliandan аватар
  • Вне сайта
  • Сообщений: 97
  • Спасибо получено: 14
Thank you Erik!
Администратор запретил публиковать записи гостям.

ExpertSDR2 21 Окт 2016 16:27 #65

  • aureliandan
  • aureliandan аватар
  • Вне сайта
  • Сообщений: 97
  • Спасибо получено: 14
@Vassily you can contact me at Этот адрес электронной почты защищен от спам-ботов. У вас должен быть включен JavaScript для просмотра.

Thank you
Администратор запретил публиковать записи гостям.

ExpertSDR2 21 Окт 2016 16:27 #66

  • VassiL
  • VassiL аватар
  • Вне сайта
  • Разработчик SDR-техники, Developer of SDR
  • Сообщений: 1299
  • Спасибо получено: 247
To aureliandan,
Tomorrow we will publish the new RC6 version for SS2/2Pro, after you installed it and check, we will discuss your issue.
Василий, Vasily,
Expert Electronics
Администратор запретил публиковать записи гостям.

ExpertSDR2 21 Окт 2016 16:29 #67

  • aureliandan
  • aureliandan аватар
  • Вне сайта
  • Сообщений: 97
  • Спасибо получено: 14
OK, thanks, so first is mandatory to uninstall the 1.1.3 R5 before installing the new version, correct ?
Администратор запретил публиковать записи гостям.

ExpertSDR2/SunSDR2 independent receivers function 23 Окт 2016 18:20 #68

  • aureliandan
  • aureliandan аватар
  • Вне сайта
  • Сообщений: 97
  • Спасибо получено: 14
I've tried today to configure ExpertSDR 1.1.3 R5 with 2 CWSkimmers and noticed the following behavior:
With both RX1 & RX2 active, for example RX1 in 40m and RX2 in 40m, waterfall signals strength identical.
Now, keeping RX2 on 40m, if I select 80m in RX1, the signal on RX2 waterfall will fade (this is more obvious if you look to the CWSkimmer waterfall), if I move RX1 to 160, all signal on RX2 waterfall will dissapear.
In the other direction if I move RX1 to 30m the RX2 waterfall will fade, with RX1 moved to 20m the signals on RX2 waterfall will almost disappear, with RX1 moved to 17,15,12,10m the signals on RX2 waterfall will be a little stronger but ~10-20% from what they were if both receivers were on the same band.
As per my understanding, in SunSDR2 PRO we have two independent receivers so they shouldn't influence each other.
Is this correct or is something that I'm missing ?

Thanks
Администратор запретил публиковать записи гостям.

ExpertSDR2/SunSDR2 independent receivers function 24 Окт 2016 05:03 #69

  • VassiL
  • VassiL аватар
  • Вне сайта
  • Разработчик SDR-техники, Developer of SDR
  • Сообщений: 1299
  • Спасибо получено: 247
Did you switch checkbox - Use RX wide filter in the Options/Device?
If you use bandpass filters, it will be switched with RX1 and the signal in RX2(on other bands) will be rejected. For comfortable working should be used wide RX filter.
Василий, Vasily,
Expert Electronics
Администратор запретил публиковать записи гостям.

ExpertSDR2 25 Окт 2016 15:00 #70

  • k9jri
  • k9jri аватар
VasilL, did I somehow miss the RC6 publication? It is several days after you referenced it but I have not seen it.

73 - Mike - K9JRI
Администратор запретил публиковать записи гостям.

ExpertSDR2 25 Окт 2016 16:12 #71

  • VassiL
  • VassiL аватар
  • Вне сайта
  • Разработчик SDR-техники, Developer of SDR
  • Сообщений: 1299
  • Спасибо получено: 247
Hello Mike,
It was 1.1.3 RC6 version for MB1 transceiver. It's not compatable with SunSDR2 Pro. But now we are working with new version for SS2/SS2 Pro it will be RC7 on this week.
k9jri пишет:
VasilL, did I somehow miss the RC6 publication? It is several days after you referenced it but I have not seen it.
Василий, Vasily,
Expert Electronics
Администратор запретил публиковать записи гостям.

ExpertSDR2 27 Окт 2016 09:37 #72

  • S58WW
  • S58WW аватар
  • Вне сайта
  • A half-truth is the most cowardly of lies.
  • Сообщений: 89
  • Спасибо получено: 24
VassiL!

Thanks for Profile Manager add on... :so_happy:
73 Pibo S58WW
SUNSDR2pro S/N EED05521500187
PC:
AMD RYZEN 7 2700 (8 cores ; 16 threads) 32 GB RAM
on Gigabyte Aorus Elite B450 with 1TB and 250 GB INTEL NVMe M.2
Администратор запретил публиковать записи гостям.

ExpertSDR2 01 Нояб 2016 05:56 #73

  • VassiL
  • VassiL аватар
  • Вне сайта
  • Разработчик SDR-техники, Developer of SDR
  • Сообщений: 1299
  • Спасибо получено: 247
A few days ago was published the new version of the ExpertSDR2 1.1.3 RC7 for SunSDR2 / SunSDR2 PRO
Link: yadi.sk/d/R6dY8hQGxjBUM

Was improved COM-ports data exchange, CW-keying via COM-ports and other small issues.
Василий, Vasily,
Expert Electronics
Последнее редактирование: 01 Нояб 2016 05:57 от VassiL.
Администратор запретил публиковать записи гостям.

ExpertSDR2 01 Нояб 2016 10:11 #74

  • aureliandan
  • aureliandan аватар
  • Вне сайта
  • Сообщений: 97
  • Спасибо получено: 14
Vassil, I've tested the new version, 1.1.3 RC7 and I have the same issues with N1MM+ and other contest software, after some time, ExpertSDR2 freeze. I've tested with different speeds from 9600 to 115200 with the same result. Without a CAT connection, ExpertSDR2 RC7 is working ok, no issues until now.
With 1.1.2 all is working ok with N1MM+ or other contest software.
Both N1MM+ and ExpertSDR2 are on the same computer.
Testing 1.1.2 CAT connection with N1MM+ -> all ok
Uninstall 1.1.2
Install 1.1.3 RC7
Update SunSDR2 Firmware
Start ExpertSDR2
Start N1MM+
It works for some time (1-2 min) then ExpertSDR2 freeze
Администратор запретил публиковать записи гостям.

ExpertSDR2 01 Нояб 2016 10:47 #75

  • aureliandan
  • aureliandan аватар
  • Вне сайта
  • Сообщений: 97
  • Спасибо получено: 14
Is there a way to activate some logging to troubleshoot this issue ?
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.186 секунд