Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****
  • Страница:
  • 1
  • 2

ТЕМА: ESSB SunSDR2PRO

ESSB SunSDR2PRO 14 Окт 2019 20:25 #1

  • EI9HEB
  • EI9HEB аватар
  • Вне сайта
  • Сообщений: 20
  • Спасибо получено: 8
Hi all I'm looking for any info about ESSB performance of SunSDR2 PRO.
1.Is it possible? (I expect yes )
2. is the audio characteristic flat ?
3.what is the maximum TX bandwidth?
4. How good/bad is it performing comparing to other rigs?
5. Preferred connection Mic1 or Mic2 or other ....
Audio/video sample highly appreciated.
Regards
Pawel
EI9HEB
How do you VooDoo?
Администратор запретил публиковать записи гостям.
Спасибо сказали: KV5J

ESSB SunSDR2PRO 24 Окт 2019 19:27 #2

  • DL5KH
  • DL5KH аватар
ESSB works very good on SunSDR2 pro/ qrp :good: :music:
max. bandwith in SSB is 10kHz. :yes:
I use a cheap USB studio Microphone over the Lan conection (Mic PC)
it has a 1 inch condenser capsule inside.
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 24 Окт 2019 19:40 #3

  • DL5KH
  • DL5KH аватар
ESSB setup for USB studio Microphone:
Clipper, Limiter, Noise gate and Filters are not in use


1.jpg


2.jpg


3.jpg


4.jpg


5.jpg
Последнее редактирование: 24 Окт 2019 19:44 от DL5KH.
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 25 Окт 2019 14:51 #4

  • EI9HEB
  • EI9HEB аватар
  • Вне сайта
  • Сообщений: 20
  • Спасибо получено: 8
Hi Kevin,
Thank you very much for the info.
I have search internet for audio samples but unfortunately without success.
Couple videos on the Youtube demonstrate receiving audio but did not see any about transmitting audio.
So if you have some feel free to share :)
Best Regards
Pawel EI9HEB.
How do you VooDoo?
Последнее редактирование: 25 Окт 2019 14:51 от EI9HEB.
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 25 Окт 2019 18:23 #5

  • 3z9am
  • 3z9am аватар
  • Вне сайта
  • Сообщений: 18
  • Спасибо получено: 3
Here is an example of my signal from sunsdrpro2 broadcast in Poland received in Germany but I mark these are the first attempts with the signal to essb still far :)
Вложения:
Последнее редактирование: 25 Окт 2019 18:27 от 3z9am.
Администратор запретил публиковать записи гостям.
Спасибо сказали: EI9HEB

ESSB SunSDR2PRO 25 Окт 2019 21:41 #6

  • EI9HEB
  • EI9HEB аватар
  • Вне сайта
  • Сообщений: 20
  • Спасибо получено: 8
Now we talking lads :so_happy:
I want more ! :girl_devil:
Daniel thank you for the sample nice one.
Pawel
EI9HEB/SP9DR
How do you VooDoo?
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 26 Окт 2019 13:00 #7

  • DL5KH
  • DL5KH аватар
Renkforce CU-4 USB Studio Microphone:


renkforceCU-4.jpg


Frequenzgang.jpg
Последнее редактирование: 26 Окт 2019 13:01 от DL5KH.
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 26 Окт 2019 14:02 #8

  • EI9HEB
  • EI9HEB аватар
  • Вне сайта
  • Сообщений: 20
  • Спасибо получено: 8
I'm currently using Kenwood TS870s and Audio Technica 2020 microphone.
I have sold nearly all of my external processing gear. And my plan is to get Sunsdr2 pro and EB 300HF amp.
How do you VooDoo?
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 26 Окт 2019 14:22 #9

  • DL5KH
  • DL5KH аватар
EI9HEB пишет:
I'm currently using Kenwood TS870s and Audio Technica 2020 microphone.
I have sold nearly all of my external processing gear. And my plan is to get Sunsdr2 pro and EB 300HF amp.

That is a good decision. :so_happy:
You will not miss your Kenwood TS870s.
EB 300HF amp is also a good decision.
I just bought the board on Ebay and made the rest myself.
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 03 Дек 2019 14:48 #10

  • n1mjf
  • n1mjf аватар
  • Вне сайта
  • Сообщений: 4
  • Спасибо получено: 2
I just finished setting up my audio yesterday but have yet to try it on the air. EV RE320, Universal Audio DCS preamp, Behringer 9024 6-band compressor, into an RME ADI-2 Pro DAC. I will post the finished results of the radio config after I can put a bit more time into it. I look forward to checking into some of the ESSB and AM nets with this set up.
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 03 Дек 2019 16:53 #11

  • EI9HEB
  • EI9HEB аватар
  • Вне сайта
  • Сообщений: 20
  • Спасибо получено: 8
RME ADI-2 Pro DAC - that is very interesting how to do you feed the audio to sunsdr?
How do you VooDoo?
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 03 Дек 2019 21:25 #12

  • EI9HEB
  • EI9HEB аватар
  • Вне сайта
  • Сообщений: 20
  • Спасибо получено: 8
Sorry for my spelling that was from the phone,
How do you feed the audio in to the Sun??
How do you VooDoo?
Администратор запретил публиковать записи гостям.

ESSB SunSDR2PRO 03 Дек 2019 21:57 #13

  • n1mjf
  • n1mjf аватар
  • Вне сайта
  • Сообщений: 4
  • Спасибо получено: 2
EI9HEB пишет:
RME ADI-2 Pro DAC - that is very interesting how to do you feed the audio to sunsdr?

I select "PC Mic" on the mic selector:
2019-12-0316_49_44-Window.jpg


The microphone and Behringer multi-band compressor I did buy just for using with the radio but the DAC I have as a result of being an audiophile and the preamp I have because my wife is a singer and I wanted something nice for her to record with too. I figure at this point, if I have them, might as well use them. I do operate the SunSDR2 remotely so plugging a mic directly into the radio is not an option for me. Currently the radio is set up in the basement, close to where the coax comes in and I am upstairs sitting in my office.

My audio settings on the rig now are as follows, I did not put any screenshot for any settings that I do not have enabled now.
Pre proc:
2019-12-0316_54_54-Window.jpg


EQ:
2019-12-0316_55_31-Window.jpg


and I have DC block enabled too despite not needing that.
Администратор запретил публиковать записи гостям.
Спасибо сказали: Rome, SP7IDX

ESSB SunSDR2PRO 04 Дек 2019 21:29 #14

  • EI9HEB
  • EI9HEB аватар
  • Вне сайта
  • Сообщений: 20
  • Спасибо получено: 8
I have sold nearly all of my external processing gear couple years ago and kept only microphone Audio Technica 2020 and USB interface SCARLET 2i2.
All the processing I'm doing in the Ableton DAW software.
It is a way better solution as no RF is getting it to the shack and changes in the setting can be done with a simple mouse click, not like before hundred of knobs and menu levels.
New equipment can be added as plugins and loads of them are for free.
The only issue I had (still really have, I'm looking for a better solution )is how to feed to processed audio to SUNSDR2 DX.
Abelton DAW software is not routing the audio to windows.
Whatever processing I have is heard only in Scarlet 2i2 Monitor output.
Windows is getting only plain audio from scarlet 2i2 input.

I have found a temporary solution I'm processing on channel 1.
Then with cable jumper from out 1 of Scarlet, im feeding into the input 2 on scarlet, then the audio is being routed to windows from channel 2.
Will be nice if SUNSDR gets the balanced input or Toslink connection it would make the life much easier.
How do you VooDoo?
Последнее редактирование: 04 Дек 2019 22:00 от EI9HEB.
Администратор запретил публиковать записи гостям.
Спасибо сказали: Rome

ESSB SunSDR2PRO 06 Дек 2019 17:05 #15

  • VU3ESV
  • VU3ESV аватар
  • Вне сайта
  • Сообщений: 8
  • Спасибо получено: 3
Hi,

Here is the configuration I am using : Focusrite solo and Ableton Live

AbletonStudioInputOutputConfiguration.png


I used the VAC cable as the output device in Ableton and VAC as the Sound card in EESDR.
VAC_SoundCARD.png


Mic Selection is MIC PC, so the sound card input is used here.

73's
VU3ESV
Администратор запретил публиковать записи гостям.
Спасибо сказали: EI9HEB
  • Страница:
  • 1
  • 2