Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

ТЕМА: ColibriDDC ICOM on Mac

ColibriDDC ICOM on Mac 26 Март 2022 11:06 #1

  • Sylvio
  • Sylvio аватар
  • Вне сайта
  • Сообщений: 9
I am using ExpertSDR2 1.3.1-11 on Mac (Monterey) and want to connect my ICOM IC-7300 via CAT
The port is recognized and works (data is active in View Log) but it is impossible to control the software which does not react to commands.
Alternative solution: ExpertSDR3 and RadioSync unfortunately
ExpertSDR3 does not recognize the Colibri DDC "Failed to start, no connection to the Colibri" despite the IP address which is functional with the ExpertSDR2 version
What is the solution?
Do you plan to do specific documentation for Mac users? (specifically for COM ports not present on Mac) because the software is promising :good: but it would need a little more support and dedicated tools. :hospital:
Thank you in advance for your reply

J'utilise ExpertSDR2 1.3.1-11 sur Mac (Monterey) et je souhaite connecter mon ICOM IC-7300 via CAT
Le port est reconnu et fonctionne (des donnés sont actives dans View Log) mais impossible de piloter le logiciel qui ne réagit pas au commandes.
Solution alternative: ExpertSDR3 et RadioSync malheureusement
ExpertSDR3 ne reconnais pas le Colibri DDC "Failed to start, no connetion to the Colibri" malgré l'adresse IP qui est fonctionnelle avec la version ExpertSDR2
Quelle est la solution?
Pensez vous faire une documentation spécifique pour les utilisateurs de Mac? (spécifiquement pour les ports COM pas présents sur Mac) car le logiciel est prometteur mais il faudrait un peu plus de support et d'outils dédiés.
Merci d'avance pour votre réponse
Вложения:
Последнее редактирование: 26 Март 2022 11:08 от Sylvio. Причина: correction
Администратор запретил публиковать записи гостям.

ColibriDDC ICOM on Mac 31 Март 2022 08:56 #2

  • Rome
  • Rome аватар
  • Вне сайта
  • Quod Licet Jovi Non Licet Bovi
  • Сообщений: 1095
  • Спасибо получено: 534
Hello Sylvio.
1. Try the SDC software, it works under macOS too.
It has CAT to connect to third-party software and TCI to connect to ESDR2 and ESDR3.

2. Please clarify, ESDR3 does not detect the DDC at all or sees it, but can't start?
Try to connect the DDC directly to the PC, avoiding routers and switches.

3. We do not plan to prepare special docs for Mac users.
About 95% of ESDR2/3 users prefer Windows because there is a good deal of third-party applications which allows to embrace full potential of our devices.
Роман, Roman
Expert Electronics
Администратор запретил публиковать записи гостям.

ColibriDDC ICOM on Mac 26 Апр 2022 14:27 #3

  • Sylvio
  • Sylvio аватар
  • Вне сайта
  • Сообщений: 9
1. Works but missing :?: content for some fields (RIG Protocol is empty, no choice available for example)
2. The Colibri can be used with an IP with ESDR2, but when launched in ESDR3 the software indicates "Failed to start, no connection to the Colibri"
3. I use Mac and PC and on Mac, ESDR2 is the best SDR software available for the Colibri. But the connection to drive it like Panadapter is complicated by lack of Mac information

1. Fonctionne mais il manque du contenu pour certains champs (RIG Protocol est vide, aucun choix disponible par exemple)
2. Le Colibri est utilisable avec une IP avec ESDR2 , mais au lancement dans ESDR3 le logiciel indique « Failed to start, no connection to the Colibri »
3. J’utilise Mac et PC et sur Mac, ESDR2 est le meilleur software SDR disponible pour le Colibri.Mais la connexion pour le piloter comme Panadapter est compliqué par manque d’informations Mac

Вложения:
Администратор запретил публиковать записи гостям.

ColibriDDC ICOM on Mac 27 Апр 2022 13:24 #4

  • Rome
  • Rome аватар
  • Вне сайта
  • Quod Licet Jovi Non Licet Bovi
  • Сообщений: 1095
  • Спасибо получено: 534
1. Follow the steps in the attached zip file. It'll activate the full RIG list
2. Make sure to use the latest ESDR3 0.12.1, it automatically sets the proper port for DDC, it should work.
Роман, Roman
Expert Electronics
Администратор запретил публиковать записи гостям.
Спасибо сказали: Sylvio

ColibriDDC ICOM on Mac 11 Май 2022 15:41 #5

  • Sylvio
  • Sylvio аватар
  • Вне сайта
  • Сообщений: 9
It doesn't work better with 0.12.1 Alpha 05032022, IP and Colibri recognized but when I launch the software via the "Start receiver" button I get the error message from my previous message. Works perfectly with ESDR version 2.0 :(
Последнее редактирование: 11 Май 2022 15:41 от Sylvio.
Администратор запретил публиковать записи гостям.

ColibriDDC ICOM on Mac 13 Май 2022 12:31 #6

  • Rome
  • Rome аватар
  • Вне сайта
  • Quod Licet Jovi Non Licet Bovi
  • Сообщений: 1095
  • Спасибо получено: 534
Just to clarify, ESDR2 and ESDR3 cannot operate simultaneously. You should completely close one application to use the other.
I do hope the issue is there.
Роман, Roman
Expert Electronics
Администратор запретил публиковать записи гостям.

ColibriDDC ICOM on Mac 24 Май 2022 14:03 #7

  • Sylvio
  • Sylvio аватар
  • Вне сайта
  • Сообщений: 9
I do not use ESDR2 with ESDR3 simultaneously. I persist and I confirm a big bug with ESDR3 and the Colibri
Администратор запретил публиковать записи гостям.

ColibriDDC ICOM on Mac 10 Июнь 2022 15:24 #8

  • Sylvio
  • Sylvio аватар
  • Вне сайта
  • Сообщений: 9
Sylvio пишет:
I do not use ESDR2 with ESDR3 simultaneously. I persist and I confirm a big bug with ESDR3 and the Colibri
Can you test and confirm that it works well with Colibri?
Администратор запретил публиковать записи гостям.

ColibriDDC ICOM on Mac 15 Июнь 2022 14:03 #9

  • Rome
  • Rome аватар
  • Вне сайта
  • Quod Licet Jovi Non Licet Bovi
  • Сообщений: 1095
  • Спасибо получено: 534
Thank you for bringing this to our attention, indeed there is an issues now, ESDR3 0.13.0 will work with ColibriDDC.
Роман, Roman
Expert Electronics
Администратор запретил публиковать записи гостям.

ColibriDDC ICOM on Mac 16 Авг 2022 17:45 #10

  • Sylvio
  • Sylvio аватар
  • Вне сайта
  • Сообщений: 9
I just installed version 0.13 on Mac. Unfortunately :twisted: this version does not work better on Mac for the Colibri and it is impossible to update the Colibri's firmware because there is no button for upgrade. On the other hand, I installed the PC version (Windows 10) and miracle :wall: , there is a button to update the firmware which has been done.
The version therefore now works on PC. I then restarted the Mac version but despite the firmware update and the Colibri which is connected and recognized, I still have the message "failed to start, no connectio..." :twisted: and therefore impossible to use this version on Mac.. :write: again :evil:
Администратор запретил публиковать записи гостям.

ColibriDDC ICOM on Mac 16 Авг 2022 19:59 #11

  • N8SDR
  • N8SDR аватар
  • Вне сайта
  • Сообщений: 631
  • Спасибо получено: 301
Sylvio пишет:
I just installed version 0.13 on Mac. Unfortunately :twisted: this version does not work better on Mac for the Colibri and it is impossible to update the Colibri's firmware because there is no button for upgrade. On the other hand, I installed the PC version (Windows 10) and miracle :wall: , there is a button to update the firmware which has been done.
The version therefore now works on PC. I then restarted the Mac version but despite the firmware update and the Colibri which is connected and recognized, I still have the message "failed to start, no connectio..." :twisted: and therefore impossible to use this version on Mac.. :write: again :evil:

Just a note for you,

Try emailing EE - reason I say this is roman is away and I don't think others are watching the forum, just a note

cheers
Please do not email me and ask for help I no longer will be part of this, If I could delete /remove my profile I would do so.
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.120 секунд