Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

ТЕМА: EESDR2 Acting Strange with N1MM RTTY Contest

EESDR2 Acting Strange with N1MM RTTY Contest 28 Сен 2019 03:50 #1

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 264
  • Спасибо получено: 5
I have had quite the experience this evening operating the MB1 with the CQWW Rtty Contest.
I have both my messages in the RUN and S&P Section,
But there are times when I hit the Function Button that the MB1 will transmit but will not go to Receive.
Even though I have that built into the Macro .
I have to push the red button to get out of EESDR2 and then press again the start it again. It is inconsistent. Sometimes it does it and sometimes it doesn't.
Not sure if it is a N1MM problem or an EESDR2 problem.
It's just weird!
Mark Griffin, KB3Z
Администратор запретил публиковать записи гостям.

EESDR2 Acting Strange with N1MM RTTY Contest 28 Сен 2019 06:15 #2

  • g0cgl
  • g0cgl аватар
  • Сейчас на сайте
  • Erik EI4KF / G0CGL
  • Сообщений: 886
  • Спасибо получено: 352
Same here Mark. I changed from N1MM to 5MContest and same issue. Solved by reverting to ESDR2 1.2

I have already stated on here the reason and I am not going to inflame things further with repitition. Besides, a major contest weekend is not the time to go reading the Forum history. Of course, your issue may be due to something else. I hope it is and is something simple. But, if you did any RTTY practice prior to the contest and did not experience the problem, then ... well I'm sure the light will dawn.

Erik.
Администратор запретил публиковать записи гостям.

EESDR2 Acting Strange with N1MM RTTY Contest 28 Сен 2019 11:40 #3

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 264
  • Спасибо получено: 5
Erik,
I am assuming that I have ESDR2 1.2 on my MB1.
But not sure.
How do I check to see the version #?
In answer to your question, I was testing MMTTY direct with the MB! and did not have any issues.
It is running MMTTY via N1MM where the issues have come about.
I could write a message on the N1MM Group.io site, but doubt I would get any responses due to what may be the limited use of the MB1 by contest operators.
There is a setup screen via N1MM for MMTTY but not sure what needs to be checked and what doesn't need to be checked.
Once I know what version I have, then perhaps I can pursue this further.
Mark KB3Z
Администратор запретил публиковать записи гостям.

EESDR2 Acting Strange with N1MM RTTY Contest 28 Сен 2019 11:50 #4

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 264
  • Спасибо получено: 5
Erik,
OK I checked the manual and I am using 1.2.0.
So I have the current version.
I must be something in the setup with N1MM and MMTTY.
In General Settings I have RCV window added to Grab Window and also when using dueling Cq's.
And then using generic routines.
Mark KB3Z
Администратор запретил публиковать записи гостям.

EESDR2 Acting Strange with N1MM RTTY Contest 28 Сен 2019 13:44 #5

  • g0cgl
  • g0cgl аватар
  • Сейчас на сайте
  • Erik EI4KF / G0CGL
  • Сообщений: 886
  • Спасибо получено: 352
Oh ok Mark. My problem was due to bad PTT timing through too high CPU utilization of ESDR2 1.3 but clearly your issue is from a different cause.

I cannot think of N1MM or MMTTY setting(s) that would cause this and I'm sure there is nothing in ESDR2 1.2 that could give rise to the problem. It would appear to be a PTT problem but of course diagnosing at a distance is difficult. I am sorry to say I cannot help.

Erik.
Администратор запретил публиковать записи гостям.

EESDR2 Acting Strange with N1MM RTTY Contest 28 Сен 2019 17:04 #6

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 264
  • Спасибо получено: 5
Erik,
I downloaded 5MContest just to see what it is all about.
It would be nice if the help screens would be in English vs Russian.
I don't see an option to do that.
How does one get MMTTY to work with 5MContest?
Mark KB3Z
Администратор запретил публиковать записи гостям.

EESDR2 Acting Strange with N1MM RTTY Contest 28 Сен 2019 18:43 #7

  • g0cgl
  • g0cgl аватар
  • Сейчас на сайте
  • Erik EI4KF / G0CGL
  • Сообщений: 886
  • Спасибо получено: 352
The English language help file is at 5mcontest.qrz.ru/5MContest_Help_ENG.exe

MMTTY is embedded and starts when you select the rtty contest (obviously CQWWRTTY) and pick it from the menu


Capture1.png



After you select TCI as the interface with ESDR2, the rest is as normal for MMTTY except that the macros need a bit of editing.
Администратор запретил публиковать записи гостям.

EESDR2 Acting Strange with N1MM RTTY Contest 30 Сен 2019 00:52 #8

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 264
  • Спасибо получено: 5
Erik,
I asked Don AA5AU some questions regarding my problems between N1MM and MMTTY.
It turned out that one of the settings I had for PTT was incorrect.
Once I fixed that, all worked fine.
Mark KB3Z
Администратор запретил публиковать записи гостям.

EESDR2 Acting Strange with N1MM RTTY Contest 30 Сен 2019 06:33 #9

  • g0cgl
  • g0cgl аватар
  • Сейчас на сайте
  • Erik EI4KF / G0CGL
  • Сообщений: 886
  • Спасибо получено: 352
Hi Mark - excellent. He's the go to guy for RTTY. He knows N1MM and Writelog inside out.

Hope you still managed a bit of a play in CQWW. Once I changed to ESDR2 1.2 all went well here. Except for propagation - it was terrible.

Erik.
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.146 секунд