Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****
  • Страница:
  • 1
  • 2

ТЕМА: MB1 SDR2 software not executing

MB1 SDR2 software not executing 01 Янв 2020 18:05 #1

  • wx2cx
  • wx2cx аватар
  • Вне сайта
  • Сообщений: 12
Hi all,
I installed On my MB1 version 4 of SDR2.
When I execute it it opens up for a few seconds and dissapears. Te installed and still same issue.
Any suggestions?
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 02 Янв 2020 17:18 #2

  • KV5J
  • KV5J аватар
  • Вне сайта
  • Сообщений: 32
  • Спасибо получено: 3
I have almost the same problem my new DX. Tried everything. I finally but it back in the box and on the shelf. The buggy software has won.

Keith,KV5J
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 02 Янв 2020 18:42 #3

  • EI9HEB
  • EI9HEB аватар
  • Вне сайта
  • Сообщений: 51
  • Спасибо получено: 20
Keith
On what system? windows, linux etc ?
Can you share more info?
How do you VooDoo?
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 02 Янв 2020 20:58 #4

  • KV5J
  • KV5J аватар
  • Вне сайта
  • Сообщений: 32
  • Спасибо получено: 3
New SunSDR2DX. Everything worked fine updated to the new version 1.3.1 update 4. Program loads but may only run for a second or 2. Most of
the time when I try and start receiving nothing happens.
Using Windows 10. :wall:

Keith,KV5J
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 03 Янв 2020 01:52 #5

  • wx2cx
  • wx2cx аватар
  • Вне сайта
  • Сообщений: 12
Installed 1.2 and it works. Updated to 1.3.1 v4 and it works.
The issue now is on WSJT, noise on TX. I wish I could go back to v3 but it is not available anymore.
Waiting for Roman to reply on my email on these issues.
Will post.
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 03 Янв 2020 02:22 #6

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 229
  • Спасибо получено: 2
I still have version 1.2 installed in my MB1
I am just very apprehensive in upgrading to the latest version.
Yes, I realize that if I upgrade and things don't work, I can downgrade back to 1.2
I assume the first thing I should do is save my settings.
Than Delete the most current version.
Download the new version install and also install the latest firmware.
Repair the virtual studio and then start EESDR Software
Load my settings and everything should work.
I assume this is the correct format in which to upgrade?
Also, what are the latest enhancements with 1.3.4?
Mark Griffin, KB3Z
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 03 Янв 2020 02:36 #7

  • wx2cx
  • wx2cx аватар
  • Вне сайта
  • Сообщений: 12
No need to uninstall anymore. After you download and execute the new version it detects the old version and removes it. All dialogue windows guide you through it. You can see the improvement on the release notes. The best addition is the new noise filer that was introduced in version 3. Amazing on SSB weak signals.
Before you do anything make sure to create a profile so you can load up all your settings on the new version.
73
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 03 Янв 2020 07:29 #8

  • g0cgl
  • g0cgl аватар
  • Вне сайта
  • Erik EI4KF / G0CGL
  • Сообщений: 784
  • Спасибо получено: 301
In case this is relevant to the issue reported......Noise on WSJTX / JTDX TX: I have had a few direct emails from new users with this problem. The solution is in the UMA but it does depend on your starting software. Some had a recent version of Muzychenko VAC and some had VB Cable. The cleanest s/w for our purpose (remember these apps were designed for pure audio application but we need harmonic suppression) is ver 4.15 of the Muzychenko s/w. If you register you will get a download link and if you modify the version number you can get 4.15 - in all cases I dealt with over Xmas / New Year this cured the problem. Example link: software.muzychenko.net/xxxxxxxxxxx/vac415full.zip

Erik
Последнее редактирование: 03 Янв 2020 07:49 от g0cgl.
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 03 Янв 2020 21:47 #9

  • wx2cx
  • wx2cx аватар
  • Вне сайта
  • Сообщений: 12
I have a paid version of Muzychenko VAC and believe it’s the latest version. I don’t understand why tax was clean on update v 3 and not in v4. If I installed version 1.2 it works fine.
I would keep version 1.2 but I really like the new NF. I requested to Roman, not sure if possible, to send me 1.3.1v3.
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 04 Янв 2020 07:44 #10

  • g0cgl
  • g0cgl аватар
  • Вне сайта
  • Erik EI4KF / G0CGL
  • Сообщений: 784
  • Спасибо получено: 301
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 04 Янв 2020 15:12 #11

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 229
  • Спасибо получено: 2
Good Morning,
I was looking to install 1.3.4 version this morning.
I picked the English language and then it asks the following questions.
An old version exists, do you want to uninstall it?
I hit the yes.
It then asks the question, Are you sure you want to remove Expert SDR MB1 and all of its components.
I am not sure how to answer this question.
I am afraid that if I say yes it will delete all my settings that I saved before starting this process.
How should I proceed?
Mark Griffin, KB3Z
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 04 Янв 2020 15:45 #12

  • g0cgl
  • g0cgl аватар
  • Вне сайта
  • Erik EI4KF / G0CGL
  • Сообщений: 784
  • Спасибо получено: 301
Settings are preserved, there is no need to worry.
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 04 Янв 2020 16:11 #13

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 229
  • Спасибо получено: 2
Erik,
I installed the new EESDR2.
Will have to give it a run for it's money and see how it compares with Version 1.2.0 which I had previously installed.
Thanks again for the help!
Mark KB3Z
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 04 Янв 2020 18:21 #14

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 229
  • Спасибо получено: 2
I notice that for some reason that the mode changes automatically now.
How can I disable this to get back to manual mode change?
Mark KB3Z
Администратор запретил публиковать записи гостям.

MB1 SDR2 software not executing 04 Янв 2020 18:29 #15

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 229
  • Спасибо получено: 2
Well, I found out what is doing this.
I use LogHX and I guess somehow it is setup per the frequency to communicate with EESDR2 as to what mode it should be per the frequency range.
Interesting, I learned something new today.
Mark KB3Z
Администратор запретил публиковать записи гостям.
  • Страница:
  • 1
  • 2
Время создания страницы: 0.169 секунд