Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

ТЕМА: Major Issues with ESDR2 and MMTTY

Major Issues with ESDR2 and MMTTY 08 Фев 2020 04:26 #1

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 204
  • Спасибо получено: 2
Good Evening,
I am trying to make at least 1 contact in the CQ WPX RTTY Contest and yet no luck at all.
MMTTY will transmit, but it seems that for some reason the frequency that shows on my MB1 does not match the frequency that Reverse Beacon is saying.
And thus, I am probably not transmitting on the frequency that they are receiving on.
I am using DIGL so that is not the problem.
I have spent the last hour trying to get this to work and to no avail whatsoever.
I even have tried it using N1MM Plus and just can't make a contact.
Does anyone have a quick, simple, easy way to do this?
In Options, Device, TX I have the following settings under DIGL.
Low 90 HZ
High 2190 HZ
Offset 2200 HZ
And sync with RX is checked.
Plus when using MMTTY the numbers are constantly changing in the software program.
HELP if you can!
Mark Griffin, KB3Z
Администратор запретил публиковать записи гостям.

Major Issues with ESDR2 and MMTTY 08 Фев 2020 09:10 #2

  • g0cgl
  • g0cgl аватар
  • Вне сайта
  • Erik EI4KF / G0CGL
  • Сообщений: 714
  • Спасибо получено: 282
Ensure you are not accidentally TXing in reverse tones.

Check the MMTTY front panel for Rev.


Capture_2020-02-08.png



If you are in reverse, that might be the reason for the Reverse Beacon freq offset. You will see changing numbers in MMTTY because it is dynamically decoding - it is not like a hardware defined fixed demodulator.
Последнее редактирование: 08 Фев 2020 09:12 от g0cgl.
Администратор запретил публиковать записи гостям.

Major Issues with ESDR2 and MMTTY 09 Фев 2020 01:19 #3

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 204
  • Спасибо получено: 2
Here is a perfect example. my frequency on the radio is 7.092.8 and yet the station I am copying per reverse beacon is 7.094
In the options TX tab I have the following settings for DIGL
Low: 70
High: 2200
Offset: 2200
I have UOS and BPF buttons pushed.
Here are some other readings,
Mark 1010
Shift 170
BW 60
AV 70
That seems to be an automatic type of setting per MMTTY.
Evidently I am copying him 1.2 KC lower than what it should be on my radio.
Mark KB3Z
Администратор запретил публиковать записи гостям.

Major Issues with ESDR2 and MMTTY 09 Фев 2020 09:39 #4

  • g0cgl
  • g0cgl аватар
  • Вне сайта
  • Erik EI4KF / G0CGL
  • Сообщений: 714
  • Спасибо получено: 282
That is because the nominal Mark frequency is 2125Hz. You are at 1010Hz, therefore will be 1115Hz low in reporting the frequency of the station on 7.094

7094 - 1.115 = 7092.885 or 7092.8 to one decimal place with no rounding.

MMTTY is dynamically locking to signals, hence Mark and Space are not fixed as they would be with a FSK demodulator. To return to the nominal setting, press HAM and it will show Mark at 2125.

In the picture below I set Mark to near 2125 and tuned to RB spot 4L8A reported on 14085.1 (yes I am 10hz off). In practical terms I am exactly on him according to the Spot, he is on that frequency and I am decoding.

Capture_2020-02-09.png
Последнее редактирование: 09 Фев 2020 10:07 от g0cgl.
Администратор запретил публиковать записи гостям.

Major Issues with ESDR2 and MMTTY 09 Фев 2020 14:58 #5

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 204
  • Спасибо получено: 2
I see the picture. But I tried this morning and still not able to Run and get a contact or do Search and Ponce and get a contact.
Can anyone give me the settings that I need to make in EESDR 2 Options TX so I can duplicate what hopefully works.
And also what your settings are for each tab in MMTTY.
Not to say that some of the basic help in the Addendum is not good..
But it looks like I need some real intensive detailed help to have both EESDR2 and MMTTY in tune with one another.
Thanks for all your help!
Mark KB3Z
Последнее редактирование: 09 Фев 2020 14:59 от KB3Z.
Администратор запретил публиковать записи гостям.

Major Issues with ESDR2 and MMTTY 09 Фев 2020 15:48 #6

  • g0cgl
  • g0cgl аватар
  • Вне сайта
  • Erik EI4KF / G0CGL
  • Сообщений: 714
  • Спасибо получено: 282
The Addendum gives you the settings for ESDR2. This document has very detailed setup instructions for MMTTY
aa5au.com/GettingStartedOnRtty.pdf
Администратор запретил публиковать записи гостям.

Major Issues with ESDR2 and MMTTY 10 Фев 2020 01:25 #7

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 204
  • Спасибо получено: 2
Ok, now this something I do not understand. Why in the options when I have for DIGl the following Numbers,
70
3000
2200
I push apply and OK.

But if I go into DIGL,
The numbers are this,
60
2200
2200

Why do they change?
Could it be because I have the Sync with RX checked?
Mark KB3Z
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.132 секунд