Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

ТЕМА: K9DUR Voice Keyer Setup

K9DUR Voice Keyer Setup 29 Фев 2020 19:24 #1

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 229
  • Спасибо получено: 2
Good Afternoon,
I have set up a CQ Contest file using Audacity. I have copied that file into the K9DUR Directory and have setup a profile and am using the Message 1 Key as the Designated Key.
I have setup the hardware as is in the Addendum but when I hit message 1 labeled CQ it keys the transmitter but no power output. I have set my PWR at 18% as the power figure.
In EESDR2 I have under sound card MME, Line 1 with channels 2, sample rate 48000, buffer 2048 latency 0

In line output I have RX1 settings as follows, MME, Line 2 with channels 2, sample rate 48000, buffer 2048 latency 0. Is there a reason I am not getting any transmit power output?
Mark Griffin, KB3Z
Администратор запретил публиковать записи гостям.

K9DUR Voice Keyer Setup 29 Фев 2020 20:30 #2

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 229
  • Спасибо получено: 2
It is now working. I went to Device/VAC in EESDR and didn't have it enabled. Once I did that everything worked. My Dumb Mistake!
Mark Griffin, KB3Z
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.126 секунд