Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

ТЕМА: Cannot Connect to MB1

Cannot Connect to MB1 17 Апр 2020 14:45 #1

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 61
  • Спасибо получено: 1
I get the error message of Cannot Connect to MB1 when I Push the Red button at the top of EESDR2.
I then get an error message of Failed to open VAC Stream! Unanticipated Host Error.
What Happened?
Mark Griffin, KB3Z
Администратор запретил публиковать записи гостям.

Cannot Connect to MB1 17 Апр 2020 15:17 #2

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 61
  • Спасибо получено: 1
When I access Ethernet 2 I do not see the LAN9500A connection.
I don't know what happened.
Mark Griffin KB3Z
Администратор запретил публиковать записи гостям.

Cannot Connect to MB1 17 Апр 2020 15:29 #3

  • g0cgl
  • g0cgl аватар
  • Вне сайта
  • Erik EI4KF / G0CGL
  • Сообщений: 390
  • Спасибо получено: 206
I hope that is not literal and you only mean that the LAN9500A ethernet is not configured. If it is, you have to reset Windows Winsock. But, first look into it as below



Capture_2020-04-17.png





and reconfigure as necessary. It happened to me that the ip settings were wiped following this week's Microsoft Update and I had to reconfigure. Maybe the same has happened to you.
Последнее редактирование: 17 Апр 2020 15:31 от g0cgl.
Администратор запретил публиковать записи гостям.

Cannot Connect to MB1 17 Апр 2020 16:14 #4

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 61
  • Спасибо получено: 1
Erik, thanks for your help.
Yuri also called me from NSI Radio.
Evidently the IP Address and Subnet Mask were not in the LAN9500A Settings.
Yes, I did find it. Mine is under Ethernet 1 not 2.
I made the change for the ethernet and made a change in Windows Firewall and all is OK.
Mark KB3Z
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.100 секунд