Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

ТЕМА: Weird Situation with 1.3.6 Version this afternoon

Weird Situation with 1.3.6 Version this afternoon 26 Июль 2020 23:55 #1

  • KB3Z
  • KB3Z аватар
  • Вне сайта
  • Сообщений: 264
  • Спасибо получено: 5
I thought that I had this version working just fine.
But I was not prepared for what happened to me this afternoon.
I went through my usual loading procedure and tuned to 20 meter FT8.
I turned on my HF Auto and went to tune and the frequency was way off. Instead of the HF Auto reading 14.074 it was reading about 2 MHZ. Plus getting extremely high SWR readings.
I thought that my antenna switch had blown outside, but the antenna's and the switch and coax turned out OK per my Rig Expert AA-30.
I tried some readings in the house and thought that possibly the HF Auto had blown.
My last recourse was to reinstall Version 1.20 with the appropriate firmware. I did that and lo and behold everything is back to normal.
I don't even want to try and figure out why?
But now everything is OK. I reset things back to the way they used to be and everything is OK.
Needless to say I was extremely perplexed and frustrated this afternoon.
That is the first time I have every had that happen with a EESDR2 Version.
Mark Griffin, KB3Z
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.128 секунд