ColibriDDC
Two receivers in a palm-sized case.
01 / 09 — КолибриДДС — согласованный чёрный ракурс
A compact HF receiver with direct down-conversion (DDC) on a 14-bit ADC: 0.1–55 MHz, and up to 800 MHz in undersampling mode. IQ recording up to 312 kHz wide, in a 125 × 65 × 26 mm case.
- ADC
- 14bit
- receivers
- 2+2
- ADC
- 125MHz
- weight
- 160g
$450$500
Explore from every angle
Loading 3D model…
Use the arrow keys to rotate and Home to reset the view. The mouse wheel scrolls the page.
Features
Lab and research
Undersampling receives signals above the ADC range, and IQ recordings are kept for analysis. Several receivers can run at once.
A receive site with a quiet band
Put the receiver where the band is quiet, at a country house away from city noise. The remote ColibriDDC receives, your home transceiver transmits.
RBN nodes
Four independent slices and data over TCI have made ColibriDDC a popular receiver for RBN skimmer nodes.
Direct headphone output
A built-in 24-bit audio codec feeds headphones directly.
Use Cases
- 01
Contest Skimmer Station
Continuous automated monitoring and CW/digital skimmer decoding across multiple bands.
- 02
Remote Listening Post
Install at an electrically quiet rural location and listen from your city apartment.
- 03
SDR Panadapter
Direct integration with external transceivers as a high-performance second receiver.
ExpertSDR3, TCI and ERS
Free ExpertSDR3 with free updates. The open TCI protocol connects loggers, skimmers and digital-mode programs without virtual COM ports or audio cables; programs without TCI use the RadioSync bridge (CAT, OmniRig). Expert Remote System (ERS) is included: control from a browser or ExpertSDR3, directly or through the ExpertCloud service.
About the software- ExpertSDR3Free software for operating on the air
- TCIAn open protocol for loggers, skimmers and digital modes
- ERSRemote operation from a browser or ExpertSDR3
SpecificationsColibriDDC
Receiver Characteristics
| HF receiver filters | ФНЧ: 55 MHz |
|---|---|
| RF ADC, resolution | 14 bit |
| ADC type | ADS4145 |
| RX Frequency range | 0.1...55 MHz |
| Sample rate | 39; 78; 156; 312 @ 24 kHz |
| RX in Nyiquist zones | 0.1...800 MHz |
See all specifications for details
Specifications
| Local oscillator TCXO, frequency | 20 MHz |
|---|---|
| Local oscillator TCXO, accuracy | ±0.5 ppm |
| External 10 MHz oscillator input | Yes |
| Built-in audio codec / Dynamic Range | 24 bit/dB |
| RF input/output | 1 SMA |
| PC interface | LAN 100 Mbps Mbit |
See all specifications for details
Optional BPF-kit board with HF octave band filters
| 160M | 1.73 - 2.6 MHz |
|---|---|
| 80M | 2.6 - 4.3 MHz |
| 60M | 4.3 - 6.5 MHz |
| 40M | 6.5 - 7.9 MHz |
| 30M | 7.9 - 13.0 MHz |
| 20M | 13.0 - 15.9 MHz |
See all specifications for details
Documentation and package contents
Bought together.
SMA to HF (PL259)
Use this adapter to connect an antenna to ColibriDDC or ColibriNANO receiver.
- Length
- 0.3m
- Connector 1
- SMA
- Connector 2
- PL259
E-Coder Mini
This radio kit is a control panel for the E-Coder Mini SDR transceiver.
- Connection
- USB-B
- Opt. enc.
- 1
- Assembly
- DIY
Price on pre-orderFind a dealer
