SunSDR2PRO

HF and VHF in a case that weighs a kilo and a half.

SunSDR2PRO — Вид спереди

01 / 04 — Вид спереди

Direct sampling on receive (DDC) and direct digital synthesis on transmit (DUC). 15 W (up to 20) on HF, 15 W on 6 m and up to 8 W on 2 m, in a 185 × 165 × 50 mm case with a one-piece milled heatsink.

HF
15W
VHF
7W
ADC
16bit
Weight
1.5kg

$1,640

Find a dealerSpecifications

Explore from every angle

SunSDR2 PRO, front and side view

Loading 3D model…

Use the arrow keys to rotate and Home to reset the view. The mouse wheel scrolls the page.

Features

Contests and SO2R

Two independent software receivers, each with a sub-receiver: two HF bands at once and split in DX mode. With ExtCtrl the compact unit becomes a complete contest position.

Home shack and field

130 dB dynamic range on HF and 114 dB on VHF, 0.2 µV sensitivity and a +10 dB preamp keep you confident on a crowded band.

Field power

10–16 V on receive and 12–16 V on transmit: a switching supply or a battery will do.

2 m VHF and transverters

A built-in +22 dB VHF LNA and transverter support. With an external amplifier the PRO runs the whole set-up, and the kit stays portable.

Use Cases

  • 01

    Contesting

    Two independent receivers allow SO2R operation and hunting multipliers on the second VFO.

  • 02

    DX Hunting

    Wide panorama and instant split frequency jump give an edge in dense pileups.

  • 03

    Remote Operation

    Streaming audio and IQ over the network enables full remote operation worldwide.

  • 04

    Digital Modes (FT8/FT4)

    Direct integration with WSJT-X and loggers via TCI protocol with no virtual cables.

ExpertSDR3, TCI and ERS

Free ExpertSDR3 with free updates. The open TCI protocol connects loggers, skimmers and digital-mode programs without virtual COM ports or audio cables; programs without TCI use the RadioSync bridge (CAT, OmniRig). Expert Remote System (ERS) is included: control from a browser or ExpertSDR3, directly or through the ExpertCloud service.

About the software
  • ExpertSDR3Free software for operating on the air
  • TCIAn open protocol for loggers, skimmers and digital modes
  • ERSRemote operation from a browser or ExpertSDR3

Hardware headroom

  • ALC*

    Input for external power amplifiers, controlled over ExtCtrl.

  • Full Duplex*

    Full-duplex operation.

* The hardware supports these functions; software support comes in ExpertSDR3 updates.

SpecificationsSunSDR2PRO

Receiver Characteristics

Receiver Characteristics
RF ADC, resolution16 bit
RF ADC, sampling rate160 MHz
ADC typeLTC2209
RX Frequency range0.1...65; 95...155 MHz
Sub-receivers2 pcs
Sample rate39; 78; 156; 312 @ 24 kHz

See all specifications for details

Receiver Characteristics
Receiver Characteristics

Transmitter Characteristics

Transmitter Characteristics
RF DAC, resolution14 bit
RF DAC, sampling rate640 MHz
TX Frequency range160-6; 2 M
Output power on HF15 (up to 20) W
Output power on 6M15 W
Output power on VHF7 (up to 8) W

See all specifications for details

Transmitter Characteristics
Transmitter Characteristics

Specifications

Specifications
Local oscillator TCXO, accuracy20 +/- 0.5 ppm
External 10 MHz oscillator inputYes
Built-in audio codec / Dynamic Range24 bit/dB
RF input/output2 HF, 1 VHF, ADC IN, DAC OUT
PC interfaceLAN 100 Mbps Mbit
DC voltage range in RX/TX10...16 / 12...16 V

See all specifications for details

Specifications
Specifications

Documentation and package contents

Bought together.

Also considerSunSDR2DXIf you need 100 W on HF without an external amplifier.SunSDR2DX
Expert Electronics

We design and manufacture SDR transceivers, receivers and software for radio amateurs.

© 2026 Expert Group LLC