You do NOT need serial ports if you use the MAC designed Rumlog which connects to ESDR2 via TCI. It is more simple and effective, and Rumlog is actually excellent software in itself.
Then connect WSJTx to ESDR2 via Rumlog.
The whole shebang with the most efficient outcome in terms of maximum decoding, relaible CAT and least PTT delay is:
- ExpertSDR2
- RumLog connected to ExpertSDR2 via TCI
- WSTJ-X connected to ExpertSDR2 via RumLog (for PTT switching and frequency)
- Soundflower as VAC (2ch-32bit 48kHz)
Do note though that WSJTx does not take advantage of 32 bit audio sampling (it is down-converted to 16 bit) and hence the high dynamic range of Expert Electronics products is lost, especially on crowded bands. Only the latest JTDX can do it -
cloud.mail.ru/public/8TvN/5caghhFHB