I have just received my e-coder mini and trying to make it work on the breadboard with SunSDR2 DX. Main VFO and push buttons are working well, however, I am unable to get the encoders to work.
I have wired the encoders into their respective spots marked on the board. eg Encoder 1, Encoder 2 etc.
clk --> 0
dt --> 90
gnd --> gnd
sw --> sw
After I assign the function to the encoder and push button from within EESDR2, the encoder does not work. The switch works fine but turning the encoder has no effect.
I also see that there is no +vcc connection from the board to the encoder and I wonder if that is the reason but if anyone has any suggestion I would appreciate any help.
Последнее редактирование: 20 Янв 2022 17:35 от VE3EY.