Hello all,

I have purchased a new E-Coder2 and now probably have problems with the power supply.

The hint with 5V/min. 0,5A I have read.
I got myself a Y-cable (2x USB port to a USB socket).
Here both currents of the USB ports are pulled and should actually provide enough for the supply of the E-Coder 2.

Unfortunately, on all systems I have problems with hanging waterfall graph, crackling audio, the software literally stalls, etc....

All machines with 1.0.4beta....Apple iMac, desktop PC and laptop do not work properly with E-Coder 2.

Does anyone here have a solution?! Or Best Practise?

Thanks and greetings

Or could my headset be the problem?

I am using a Heil Pro Elite with Dynamic Element.
For this I only have the 3.5 to 6.3 jack adapter.

Now I´ve tested the E-Coder 2 with separate Power-Supply on USB and the Problem is still the same.
-> I think Power-Supply is not the Problem.

I also tried several Headsets.....also not the Problem.

I think the E-Coder self is Buggy.....

Did you run the "Ecoder2Firmware.exe" firmware update app which is laying inside the ExpertSDR3 program file ?
Mine works perfectly OK after one of the last updates.
73'
Agelos

I will test it...thx for the hint!

At the moment i test the E-Coder 2 now on my machines (Apple/Win) with the ESDR2-Software............ and everything is fine

SV3RF пишет:
OMG...i didn´t see it

It works perfect!!!!!!!!!!!

THX!

Glad it helped you.
Left click to setup the push buttons.
Right click to setup the 3 knobs at the top.
73'
Agelos

SV3RF пишет:
I have already been able to find that out.

I just had imense problems with the audio quality.
Thanks for the tip with the firmware manager

73, Volker

Where about in ESDR3 is a update for e-coder2 firmware as i don't see any reference, i cant get the E-Coder2 to work in Windows.
(works on my iMac)

Regards,
Mark VK8MS.

Hello Mark.
Check this document - drive.google.com/file/d/1xMMogruIcYqwD65IrmVWm1cy_Xid-N0v/view