Good day all. I am trying to setup my new Sunsdr2DX with the Esdr3. In the upper right of the software there are the AGC-Drive-Tune- then TCI. I want TCI to become Mic1 and cannot find anywhere a way to activate Mic1. If I right click on the headphones tab at the bottom of the screen all that is available next to the microphone symbol is "unused".
Any help here would be much appreciated !

Randy N1KWF

(Right clic) on mic upper right corner

Clic on cogwheel
sm6usu Svante

Sorry had 2 screen dumps with the text but not the right format. Anyway Top right corner Right clic on Mic and a dropdown menu opens.
Next. Clic on Cogwheel (settings) all mic settings opens and clic Mic 1 also here if it is what you want.
sm6usu Svante

Cannot rt click. TCI is there but grey and not clickable. If I switch to CW TCI changes to WPM but switching to USB/LSB TCI does not change. Maybe the radio is not recognizing the Mic connected to Mic1 ?

Do you have sdr 3 installed? the TCI is down right with the earphone headset symbol. I am refering to Top right corner where you have the Mic text You have to put Mic 1 in on 2 places.
Start with mic on top right and right clic on mic a dropdown menu will open chose Mic 1 then clic on settings (the cogwheel) then you will see Mic 1 mic 2 and pc and tci chose mic 1
Maybe I have missunderstand you. Are you going to run ssb with mic 1 or is it maybe something else you are trying to do?
sm6usu Svante

Ge Svante. The TCI is green on the lower right. Immediately to the right of TUNE (upper right) is TCI not Mic. I am trying to use phone. Currently I am on 28374/USB. On the upper right I have AGC/DRIVE/TUNE/TCI. When I switch to CW I have AGC/DRIVE/TUNE/WPM. I do not see how to make the TCI change to MIC

OK is this what you see

Yes, I am using ESDR3

Yes, I see what you are talking about but where you see MIC upper right I have TCI. No MIC. I am aware of the gear wheel to set mic settings but need to get to MIC first

see attached

This is showing the radio in USB mode

Sorry cant see any attachment

Have you the same?

Yes, exactly.

Please see attached. I do not seem to be able to get attachments to save correctly. Sorry if it is a duplicate.