Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

ТЕМА: ExpertSDR2 software for MB1

ExpertSDR2 software for MB1 02 Июль 2019 10:17 #91

  • iw7dmh
  • iw7dmh аватар
  • Вне сайта
  • Сообщений: 138
  • Спасибо получено: 69
I would not be so severe with the designers of the Sun.
Currently the stable EESDR version is 1.2 and it works fine. The 1.3, as it is clearly written on the web page, is based on the new version of Qt. This introduces lots of software modifications and improvements but also structural bugs that must be solved before going on with new features. While it seems the development is slowed down, actually EESDR will have a longer life.
Consider EESDR is the only real multiplatform SDR system, it is free and it has nice features that begin where all other rigs end (think about TCI interface for example).
Well, it still misses some useful features, but what is the perfect rig out there?
I don't like to make comparisons, but also every other rig needs additional software to get its best. In addition for that rigs you have to pay for new sw releases or you have to settle for a free but obsolete interface. Really I can't see the point.

73' Enzo
iw7dmh
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 02 Июль 2019 14:14 #92

  • KV5J
  • KV5J аватар
  • Вне сайта
  • Сообщений: 32
  • Спасибо получено: 3
Enzo

I understand but.... If we are to test the beta versions, they at least need to be usable. Bugs are one thing but I don't want to test software that makes my MB1 a lessor unit. And I believe beta testers are needed.

Keith, KV5J
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 01 Сен 2019 06:54 #93

  • g0cgl
  • g0cgl аватар
  • Сейчас на сайте
  • Erik EI4KF / G0CGL
  • Сообщений: 883
  • Спасибо получено: 349
So we are now on Beta 7. Anyone MB1 user with ITU Region recognition issues or lack of 60m / 11m can be assured that the problem is known and in hand.

Users spent a total of 8 man hours testing and advising on changes to pre-release ESDR2 Beta 7 to bring the receiver performance in line with 1.2.0 and have more or less succeeded. The severe loss of AGC-T will have to be accepted if you want to use 1.3

Erik.
Последнее редактирование: 01 Сен 2019 06:54 от g0cgl.
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 01 Сен 2019 12:53 #94

  • KV5J
  • KV5J аватар
  • Вне сайта
  • Сообщений: 32
  • Спасибо получено: 3
Only 8 man hours? What is that about?


Keith, KV5J
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 18 Сен 2019 12:56 #95

  • g0cgl
  • g0cgl аватар
  • Сейчас на сайте
  • Erik EI4KF / G0CGL
  • Сообщений: 883
  • Спасибо получено: 349
Notch filter demo shows the new feature is well implemented in software. Well done. I hope there will be a hardware link to the TNF button in the MB1, by firmware update perhaps.

Erik.
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 01 Окт 2019 15:49 #96

  • OH7XM
  • OH7XM аватар
  • Вне сайта
  • OF DXer
  • Сообщений: 51
  • Спасибо получено: 3
Erik
ver 1.3 seem to be released!!!
Will test it
Arno
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 02 Окт 2019 10:10 #97

  • HB9FXU
  • HB9FXU аватар
  • Вне сайта
  • Сообщений: 33
  • Спасибо получено: 3
hi all
i was still on 1.2 version and updated to the final 1.3 yesterday.
looked good on the first view but then ... ...
1.3 does not save different vac-gains in the different profiles ! .. not usable for me. :nea:
It is disappointing that such an important function was not implemented or do i something wrong ??
rolled back to 1.2

73 de thomas
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 02 Окт 2019 11:17 #98

  • g0cgl
  • g0cgl аватар
  • Сейчас на сайте
  • Erik EI4KF / G0CGL
  • Сообщений: 883
  • Спасибо получено: 349
You do nothing wrong. There is a bug. I just tested it.

The entries exist in the profiles as below but there must be something amiss. My VAC RX gain in my normal profile is -40 and in a different profile below it is set at -35 but when I select that profile, the one that contains the entries you see, VAC gain remains at -40 and does not change to -35 as it should.

[SunSDR2_VAC0]
vac_driver=2
vac_rx_name=@ByteArray(Line Out (Virtual Cable 1))
vac_tx_name=@ByteArray(Line 2 (Virtual Cable 2))
vac_rx=0
vac_tx=4
vac_sampleRate=6
vac_bufferSize=5
vac_latency=0
vac_rx_gain=-35
vac_tx_gain=-9
vac_enable=true
Последнее редактирование: 02 Окт 2019 11:44 от g0cgl.
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 02 Окт 2019 12:34 #99

  • Rome
  • Rome аватар
  • Вне сайта
  • Quod Licet Jovi Non Licet Bovi
  • Сообщений: 707
  • Спасибо получено: 294
Thanks for reporting the issue, we'll take a look at it.
Роман, Roman
Expert Electronics
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 05 Окт 2019 09:22 #100

  • EA1 Primi
  • EA1 Primi аватар
  • Вне сайта
  • Сообщений: 11
  • Спасибо получено: 1
Greetings to all
ExpertSDR2 x64 v.1.3.0 does not work in 11M?
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 05 Окт 2019 13:26 #101

  • F1DJY
  • F1DJY аватар
  • Вне сайта
  • Сообщений: 50
  • Спасибо получено: 13
You can enable the 11М band by changing the itu.ini file (change false on true) (C:\Users\User_Name\AppData\Local\Expert Electronics\ExpertSDR2).
Jean-Marie F1DJY
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 11 Окт 2019 10:44 #102

  • g0cgl
  • g0cgl аватар
  • Сейчас на сайте
  • Erik EI4KF / G0CGL
  • Сообщений: 883
  • Спасибо получено: 349
Not a bug apparently, it was always like this. But now the settings are saved and there are other fixes and changes in 1.3.1 Beta 1 (see download sections for each product). This version also has the new Notch Filter implementation.

Erik.
Последнее редактирование: 11 Окт 2019 10:45 от g0cgl.
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 12 Окт 2019 19:08 #103

  • efficace
  • efficace аватар
  • Вне сайта
  • Сообщений: 41
  • Спасибо получено: 1
Hello
with version 1.3.1 beta 1, there is a beug with AGC for FM modulation (0db), it drifts much too much, and there is also a problem with micro gain settings
Steph
F4DNK Ingenieur Radar military S/390 IBM
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 14 Окт 2019 08:00 #104

  • Rome
  • Rome аватар
  • Вне сайта
  • Quod Licet Jovi Non Licet Bovi
  • Сообщений: 707
  • Спасибо получено: 294
Hi,
It's hard to understand what are you talking about, please make a short video of the issue.
Роман, Roman
Expert Electronics
Администратор запретил публиковать записи гостям.

ExpertSDR2 software for MB1 15 Окт 2019 18:06 #105

  • efficace
  • efficace аватар
  • Вне сайта
  • Сообщений: 41
  • Спасибо получено: 1
Hello Rome
with version 1.3.0 beta 6 or another version with maximum amplitude AGC 0db FM, my power amp is stable with modulation.

with version 1.3.1 beta 1 and the same configuration in FM, my power on the amp varies from 80 watts with the modulation.
I think the 0db CAG in FM is poorly calibrated

I send you the video by email
cordialy
F4DNK Ingenieur Radar military S/390 IBM
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.275 секунд