I get the error message of Cannot Connect to MB1 when I Push the Red button at the top of EESDR2.
I then get an error message of Failed to open VAC Stream! Unanticipated Host Error.
What Happened?
Mark Griffin, KB3Z

When I access Ethernet 2 I do not see the LAN9500A connection.
I don't know what happened.
Mark Griffin KB3Z

I hope that is not literal and you only mean that the LAN9500A ethernet is not configured. If it is, you have to reset Windows Winsock. But, first look into it as below








and reconfigure as necessary. It happened to me that the ip settings were wiped following this week's Microsoft Update and I had to reconfigure. Maybe the same has happened to you.

Erik, thanks for your help.
Yuri also called me from NSI Radio.
Evidently the IP Address and Subnet Mask were not in the LAN9500A Settings.
Yes, I did find it. Mine is under Ethernet 1 not 2.
I made the change for the ethernet and made a change in Windows Firewall and all is OK.
Mark KB3Z