Tuner AAT-100

Automatic Antenna Tuner AAT-100 was designed for SunSDR2 DX transceivers. Allowed SWR level is up to 5 (resistance level in a range from 15 up to 300 Ohm).

E-Coder2 SE

Control panel of the new generation with high-quality sound-card on board. Allows you to control any of our devices, completely eliminating monitoring delay. It will be especially useful for those who use the ExpertRemote system and who place their transceiver at any distance from the operating position.

Resolution 1024 PPR

E-Coder Plus

The E-Coder panel was designed for a convenient way of controlling ExpertSDR2. Assignable buttons allow you to use almost any function there is in the ExpertSDR2.

Resolution 1024 PPR

E-Coder

The E-Coder panel was designed for a convenient way of controlling ExpertSDR2. Assignable buttons allow you to use almost any function there is in the ExpertSDR2.

Resolution 256 PPR

Hardware control panel E-Coder Mini

Hardware control panel E-Coder Mini is a perfect budget choice and fully functional analog of large E-Coder panel. Note! Setting the buttons and additional N-coders is done self-sufficiently.

WLAN switch

This is a universal switch, controlled via a wireless WLAN connection.

Footswitch PTT

The footswitch is intended to switch SunSDR transceiver to TX-mode. Cables length - 2.0 m, Jack - 6,3mm. Hard flexible cable. Convenient execution.

HF cable BNC-BNC

The cable is used to connect the calibration oscillator to the transceivers antenna connector.

BNC to HF (PL259)

Use this adapter to connect an antenna to the SunSDR2 transceiver.

Mini UHF to HF (PL259)

Use this adapter to connect an antenna to SunSDR2 PRO transceiver.

SMA to HF (PL259) adapter

Use this adapter to connect an antenna to ColibriDDC or ColibriNANO receiver.

EXTCTRL "" cable

Use this cable to connect the ""-line of the transceiver to an external power amplifier (PA). With the help of this cable, the transceiver switches an external PA to TX mode. It can be used with MB1, SunSDR2 DX, SunSDR2 PRO, and SunSDR2 QRP.

"" cable for PA HLV-400/550/950/1000

Use this cable to connect the ""-line of the MB1 transceivers to an external power amplifier (PA) HLV-400/550/950/1000. With the help of this cable, 1 transceiver switches an external PA to TX mode via Remote jack.

PTT cable for 1

Use this cable to connect the ""-line of the 1 transceiver to an external power amplifier (PA). With the help of this cable, 1 transceiver switches an external PA to TX mode.

BAND-data cable

Use this cable to connect the ExtCtrl connector of the transceiver to an SPE Expert power amplifier (PA). With the help of this cable, the transceiver can switch bands and turn an external PA to TX mode. It can be used with MB1, SunSDR2 DX, SunSDR2 PRO and SunSDR2 QRP.