Эксперт Электроникс - Expert Electronics - Topic: CW Paddle setup, extra dot/dash (1/1)

Welcome, Guest

International Forum

CW Paddle setup, extra dot/dash

PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!

TOPIC: CW Paddle setup, extra dot/dash

CW Paddle setup, extra dot/dash 02 Jul 2023 16:53 #1

Almesar	I recently acquired a SunSDR2 Pro and I have difficulties making the correct setup for the CW key; there is always an extra dash and dot, I have already tried several paddles but the result is the same. Can someone guide me on what it is, or what are the parameters in ExpertSDR3 that I should adjust under Break in, to solve this problem? Thank you Al
	The administrator has disabled public write access.

CW Paddle setup, extra dot/dash 03 Jul 2023 06:36 #2

Rome OFFLINE Quod Licet Jovi Non Licet Bovi Posts: 286 Thank you received: 139	Make sure you have the latest firmware to use SS2PRO with the ESDR3 1.0.4
	Роман, Roman Expert Electronics The administrator has disabled public write access.

CW Paddle setup, extra dot/dash 03 Jul 2023 11:24 #3

Almesar	Thank you for replying to my message, I am using ExpertSDR3 1.04 Beta and firmware 86.8 in my SunSDR2 Pro. Are these the latest updates? I change de paddle for a straight key and work better, however, no matter how fast or slow I operate the key, it always produces a slow speed, and it sounds slow. Thank you
	The administrator has disabled public write access.

CW Paddle setup, extra dot/dash 03 Jul 2023 15:52 #4

oz1ctz OFFLINE Posts: 17 Thank you received: 5	Hi.. I use this setting , and it works fine . I use the reverse paddel you might want to change that. Also I use the JACK input on the back side of the pro2 . 73 de OZ1CTZ Brian
	The administrator has disabled public write access.

CW Paddle setup, extra dot/dash 03 Jul 2023 20:50 #5

Almesar	Brian, Thank you!!! configuration worked. I really appreciate it
	The administrator has disabled public write access.

International Forum

CW Paddle setup, extra dot/dash

Time to create page: 0.076 seconds