Welcome, Guest
Username: Password: Remember me

TOPIC: ACOM 06AT

ACOM 06AT 20 Nov 2023 16:30 #1

  • torriens
  • torriens's Avatar
  • OFFLINE
  • Posts: 41
  • Thank you received: 1
Dear All,

I have connected the ACOM 06AT tuner to my ACOM 1200S Amplifier.
I am sending 25W RF power from the SUNSDR2 FDX to the tuner by pressing the TUNE button in ESDR3.
I see 25W RF power going to the tuner (ACOM EBOX), but it is not doing the tuning cycle. Gives a time out.
Anyone who can shine a light on this issue?

Thanks.




Schermafbeelding2023-11-20om17.29.41.png
Attachments:
Last Edit: 20 Nov 2023 16:35 by torriens.
The administrator has disabled public write access.

ACOM 06AT 20 Nov 2023 17:48 #2

  • torriens
  • torriens's Avatar
  • OFFLINE
  • Posts: 41
  • Thank you received: 1
Settings ESDR3
Schermafbeelding2023-11-20om18.50.11.jpg
Last Edit: 20 Nov 2023 17:51 by torriens.
The administrator has disabled public write access.

ACOM 06AT 20 Nov 2023 20:53 #3

  • Svante
  • Svante's Avatar
  • OFFLINE
  • Posts: 48
  • Thank you received: 9
Have you tried tune in Standby? Picture shows operate?
I have a Rf2K-s and it tunes in "standby " not Operate
73 de sm6usu
sm6usu
The administrator has disabled public write access.

ACOM 06AT 21 Nov 2023 05:21 #4

  • torriens
  • torriens's Avatar
  • OFFLINE
  • Posts: 41
  • Thank you received: 1
Thanks, I will check this.
Let you know.
The administrator has disabled public write access.

ACOM 06AT 21 Nov 2023 17:52 #5

  • torriens
  • torriens's Avatar
  • OFFLINE
  • Posts: 41
  • Thank you received: 1
Hi,
Placed the Amplifier in standby. Send 25RF power form the SUNSDR2 DX (TUNE BUTTON ESDR3) to the tuner.
I get the Drive RF in the green light (Middle Position ACOM EBOX) but still no ATU MATCHED. Time out - Incomplete Process,.....
Hmm.
The administrator has disabled public write access.

ACOM 06AT 23 Nov 2023 15:00 #6

  • S58WW
  • S58WW's Avatar
  • OFFLINE
  • A half-truth is the most cowardly of lies.
  • Posts: 74
  • Thank you received: 26
I dont see PA button on top line off your EESDR3. Do you enable PA PTT by band? Do you have PA PTT enabled in TUNE? Just my 5 cents.
Well I dont know if you need any signal to tuner to go to transmit.
73 Pibo S58WW
SUNSDR2DX
Main shack PC:
AMD RYZEN 7 2700 (8 cores ; 16 threads) 32 GB RAM
on Gigabyte Aorus Elite B450 with 1TB Samsung 980 NVMe M.2
NVIDIA GeForce GTX 1660 SUPER
Last Edit: 23 Nov 2023 15:13 by S58WW.
The administrator has disabled public write access.

ACOM 06AT 27 Nov 2023 16:43 #7

  • torriens
  • torriens's Avatar
  • OFFLINE
  • Posts: 41
  • Thank you received: 1
No luck yet.
How do I get a solid 25W carrier to the tuner?
Pushing the TUNE button in ESDR3 is not working.
Do I need to use AM of a CW key to get this power as a straight carrier to the tuner?
The administrator has disabled public write access.

ACOM 06AT 27 Nov 2023 17:34 #8

  • torriens
  • torriens's Avatar
  • OFFLINE
  • Posts: 41
  • Thank you received: 1
GOT IT!!
You where right I needed to activate the USE IN TUNE option.
Thanks a lot.
Working like a charme now.
Attachments:
The administrator has disabled public write access.

ACOM 06AT 28 Nov 2023 05:18 #9

  • torriens
  • torriens's Avatar
  • OFFLINE
  • Posts: 41
  • Thank you received: 1
Solved
The administrator has disabled public write access.
Time to create page: 0.123 seconds