Эксперт Электроникс - Expert Electronics - Topic: ACOM 06AT (1/1)

Welcome, Guest

International Forum

TOPIC: ACOM 06AT

ACOM 06AT 20 Nov 2023 16:30 #1

torriens OFFLINE Posts: 43 Thank you received: 1	Dear All, I have connected the ACOM 06AT tuner to my ACOM 1200S Amplifier. I am sending 25W RF power from the SUNSDR2 FDX to the tuner by pressing the TUNE button in ESDR3. I see 25W RF power going to the tuner (ACOM EBOX), but it is not doing the tuning cycle. Gives a time out. Anyone who can shine a light on this issue? Thanks. Attachments: Schermafbe...9.41.png (392KB)
	Last Edit: 20 Nov 2023 16:35 by torriens. The administrator has disabled public write access.

ACOM 06AT 20 Nov 2023 17:48 #2

torriens OFFLINE Posts: 43 Thank you received: 1	Settings ESDR3
	Last Edit: 20 Nov 2023 17:51 by torriens. The administrator has disabled public write access.

ACOM 06AT 20 Nov 2023 20:53 #3

Svante NOW ONLINE Posts: 48 Thank you received: 9	Have you tried tune in Standby? Picture shows operate? I have a Rf2K-s and it tunes in "standby " not Operate 73 de sm6usu
	sm6usu The administrator has disabled public write access.

ACOM 06AT 21 Nov 2023 05:21 #4

torriens OFFLINE Posts: 43 Thank you received: 1	Thanks, I will check this. Let you know.
	The administrator has disabled public write access.

ACOM 06AT 21 Nov 2023 17:52 #5

torriens OFFLINE Posts: 43 Thank you received: 1	Hi, Placed the Amplifier in standby. Send 25RF power form the SUNSDR2 DX (TUNE BUTTON ESDR3) to the tuner. I get the Drive RF in the green light (Middle Position ACOM EBOX) but still no ATU MATCHED. Time out - Incomplete Process,..... Hmm.
	The administrator has disabled public write access.

ACOM 06AT 23 Nov 2023 15:00 #6

S58WW OFFLINE A half-truth is the most cowardly of lies. Posts: 75 Thank you received: 25	I dont see PA button on top line off your EESDR3. Do you enable PA PTT by band? Do you have PA PTT enabled in TUNE? Just my 5 cents. Well I dont know if you need any signal to tuner to go to transmit.
	73 Pibo S58WW SUNSDR2DX Main shack PC: AMD RYZEN 7 2700 (8 cores ; 16 threads) 32 GB RAM on Gigabyte Aorus Elite B450 with 1TB Samsung 980 NVMe M.2 NVIDIA GeForce GTX 1660 SUPER Last Edit: 23 Nov 2023 15:13 by S58WW. The administrator has disabled public write access.

ACOM 06AT 27 Nov 2023 16:43 #7

torriens OFFLINE Posts: 43 Thank you received: 1	No luck yet. How do I get a solid 25W carrier to the tuner? Pushing the TUNE button in ESDR3 is not working. Do I need to use AM of a CW key to get this power as a straight carrier to the tuner?
	The administrator has disabled public write access.

ACOM 06AT 27 Nov 2023 17:34 #8

torriens OFFLINE Posts: 43 Thank you received: 1	GOT IT!! You where right I needed to activate the USE IN TUNE option. Thanks a lot. Working like a charme now. Attachments: Schermafbe...3.22.png (200KB)
	The administrator has disabled public write access.

ACOM 06AT 28 Nov 2023 05:18 #9

torriens OFFLINE Posts: 43 Thank you received: 1	Solved
	The administrator has disabled public write access.

International Forum

Time to create page: 0.136 seconds