I'm a new SunSDR2 DX owner, with the new AAT-100 tuner. I originally set up the radio and tuner and did RX just fine. However in TX (20-25W drive, 20W Tune), the SWR meter shows no power out and 1:! SWR (doesn't move) on all bands. I have a G5RV (10-40M) that is non-resonant, so this should not be. I bought a new Daiwa SWR Meter and put it between the radio and tuner and no meter movement when transmitting.
I re-configured to have the radio connected to my Z100 Plus LDG tuner and then the antenna. The tuner got power and successfully tuned 20M.
For what it's worth, I did set up VAC and COM ports to HRD and called CQ on PSK. Had a guy come right back to me, but lost him in the noise. So, I'm getting power out, but unless the new Daiwa meter is DOA, why can't I see it?
Any ideas on what I'm doing wrong or next steps on troubleshooting?
Thanks for the help.
Tim K6ACF