Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: Lower than expected TX port

Lower than expected TX port 23 Nov 2023 19:33 #1

  • ng7e
  • ng7e's Avatar
  • OFFLINE
  • Posts: 14
  • Thank you received: 3
I'm unsure if this is happening to anyone else or only me. When i TX, it usually get about 54w of power output with an SWR of about 1.51:1. I'm running Expert SDR2 version 1.3.1 Update 11.
SunSDR2DXpoweroutput.jpg
The administrator has disabled public write access.

Lower than expected TX port 24 Nov 2023 09:06 #2

  • Klaus
  • Klaus's Avatar
  • OFFLINE
  • DL1DTL
  • Posts: 1
Wow, you should be happy. I get only max 20W with my PRO :D

73 Klaus DL1DTL
The administrator has disabled public write access.

Lower than expected TX port 24 Nov 2023 15:27 #3

  • ng7e
  • ng7e's Avatar
  • OFFLINE
  • Posts: 14
  • Thank you received: 3
Klaus, this doesn't seem normal!!! Is there a cure for this or is this the expected output? I feel like i paid for a radio to TX with 100w but half the power and full price?
The administrator has disabled public write access.

Lower than expected TX port 24 Nov 2023 17:08 #4

  • M1TZR
  • M1TZR's Avatar
  • OFFLINE
  • Posts: 19
  • Thank you received: 6
What version is your radio a Pro or a DX ?
As Klaus says you are doing well to get that out of a Pro. Most I manage is about 17w.

Paul
The administrator has disabled public write access.

Lower than expected TX port 24 Nov 2023 19:04 #5

  • ng7e
  • ng7e's Avatar
  • OFFLINE
  • Posts: 14
  • Thank you received: 3
I should have stated what version i have. I have the SunSDR2 DX. The meter on the software says it's putting out 100w, but my LP-100A only says 50-60w.
The administrator has disabled public write access.

Lower than expected TX port 24 Nov 2023 19:15 #6

  • M1TZR
  • M1TZR's Avatar
  • OFFLINE
  • Posts: 19
  • Thank you received: 6
No problem, people would have assumed you had a Pro as that is the section you have posted the question in.
Unfortunately I have no experience with the DX model so can't offer any further assistance.
It may be worth re asking in the DX section.

Either way good luck in finding yhe solution.

Paul
Last Edit: 24 Nov 2023 19:16 by M1TZR.
The administrator has disabled public write access.

Lower than expected TX port 24 Nov 2023 19:39 #7

  • ng7e
  • ng7e's Avatar
  • OFFLINE
  • Posts: 14
  • Thank you received: 3
well... perhaps i should post in the proper location.. let me go do that now! THank you
The administrator has disabled public write access.
Time to create page: 0.079 seconds