I use for a long time ExpertSDR2 1.3.1 update 9 and WSJT-X v2.5.4 without any issue.
I wanted to upgrade to more recent WSJT v2.6.1 (keeping ExpertSDR2) but I have a connection failure (or emulation failure) with WSJT-X v2.6.1 (same working configuration as before).
WSJT-X settings (Radio):
Rig : Kenwood TS-480
Poll Interval: 1s
Serial Port COM33 (VSPE Splitter with COM31 CAT SunSDR2 "RX2" / COM32 CAT for DXLab Commander "RX2"/ COM33 CAT for WSJT-X "RX2")
Baud rate: 38400
Data Bits: 8
Stop Bits: 1
Handshake: None
Force Control Lines: DTR = nothing / RST = nothing
PTT Method: RTS
Port: COM38 (VSPE Splitter with COM37 PTT SunSDR2 "RX2" / COM38 PTT for WSJT-X "RX2")
Mode: Data/Pkt
Split Operation: Rig
This configuration works perfectly with ExpertSDR2 1.3.1 update 9 and WSJT-X v2.5.4 both on SunSDR2 DX and SunSDR2 PRO but has a CAT Hamlib error with v2.6.1.
I tried to choose "Kenwood TS-2000" and moved Handshake from none to Hardware but still error...
I'm lost...
Any experience?
Any solution?
73 - Damien F5RRS
The administrator has disabled public write access.
WSJT-X v2.6.1 and ExpertSDR2 1.3.1 update 9 "hamlib error"
20 May 2023 07:23 #2