Welcome, Guest
Username: Password: Remember me
Please offer suggestions via our GitHub page - github.com/ExpertSDR3/ExpertSDR3-SUGGESTIONS
Before publishing a suggestion, please check that the same idea was not suggested before.

TOPIC: V3 suggestions

V3 suggestions 23 Dec 2022 13:00 #1

This I miss from V2 are:

In V3 there are no clickable diamond carets above the spectrum to show where the memories are stored.

Also, in CW mode, the key (straight or paddle) no logner generates a tone when operated until you hit 'Breakin' to actually transmit. It is useful to be able to hear your tone without transmitting to help net onto the other operator's frequency, and to set your paddle WPM before hitting 'Breakin' and going into transmit.

Also, I believe it is being looked at, but he ability to use the VHF antenna connector for a transverter, and the V3 software show the actual frequenecy of operation can't come soon enough! 2m is a very common IF for the upper bands.

Hopefully these features will bne resurrected and/or added in V3?

73 - Rob G0MOH.
Last Edit: 23 Dec 2022 13:01 by G0MOH.
The administrator has disabled public write access.

V3 suggestions 23 Dec 2022 20:03 #2

I see CW netting sidetone is back today in v1.0.2 :yahoo:

73 - Rob G0MOH
The administrator has disabled public write access.

V3 suggestions 13 Jan 2023 16:46 #3

Hi all,
-in CW mode the max allowed bandwidth is +/-1kHz (USER), in the previous version V2 was bigger then +/-1kHz.
-the Shortcuts menu is missed respect to the version V2
Please implement all cw keyer settings in Shortcuts menu if will be activated.
Thanks

Nicola IK3JLS
The administrator has disabled public write access.

V3 suggestions 17 Jan 2023 13:33 #4

Hi all,

-memory list sorted by frequency now is not possible (in V2 was possible), please add.
-monitor audio during antenna tuning (reduced power) is very high, no regulation is foreseen, please add.

Thanks

Nicola IK3JLS
The administrator has disabled public write access.

V3 suggestions 17 Jan 2023 13:35 #5

NOW ONLINE
Posts: 2
Hi all,

-swap of IQ output is not included, please add.

Thanks

Nicola IK3JLS
The administrator has disabled public write access.

V3 suggestions 17 Jan 2023 21:59 #6

  • VK6NX
  • VK6NX's Avatar
  • OFFLINE
  • Posts: 245
  • Thank you received: 195
IK3JLS wrote:
-swap of IQ output is not included, please add.

Go to Menu (top of this page), hover section "Software", select "Bug Reports / Suggestions" and read. Github specific section was created on purpose.

Also please note, that ESDR3 - in principle - is not a clone of ESDR2. Some ESDR2 features will remain in ESDR2 only and those might be implemented in ESDR3 differently and if they line-up (and make sence) with ESDR3 approach and architecture.
The administrator has disabled public write access.
The following user(s) said Thank You: Rome
Time to create page: 0.097 seconds