Welcome, Guest
Username: Password: Remember me
Please offer suggestions via our GitHub page - github.com/ExpertSDR3/ExpertSDR3-SUGGESTIONS
Before publishing a suggestion, please check that the same idea was not suggested before.

TOPIC: E-coder - chainable commands assigned to the buttons (-> instant SPLIT)

E-coder - chainable commands assigned to the buttons (-> instant SPLIT) 06 Jul 2021 00:03 #1

  • OK1RR
  • OK1RR's Avatar
  • CW forever!
  • Posts: 16
  • Thank you received: 14
(already published eesdr.com/en/forum-en/e-coder/9112-e-coder-chainable-commands-assigned-to-the-buttons-instant-split#18418)
A very useful idea borrowed from the Elecraft K3 - the commands assigned to each E-coder button should be chainable, ie. there should be possible to assign more commands to a single button. This will form a macro. Very useful for split operation if:

1) VFO B QSY to VFO A frequency + 1 kHz (UP 1 is a good starting point)
2) The E-coder main tuning knob assigned to VFO B
3) SUB RX ON and assigned to VFO B
I used similar arrangement with my K3 for years. It saved lot of work and lot of errors....

This article is a stub. You can help by expanding it providing more/new ideas and suggestions. Don’t hesitate to borrow a good idea from an older proven radio.

You can download a cumulative list of additions and suggestions at:
The administrator has disabled public write access.
Time to create page: 0.066 seconds