Welcome, Guest
Username: Password: Remember me
*****PLEASE, CHECK ALL PREVIOUS TOPICS, BEFORE CREATING A NEW ONE! DUPLICATED TOPICS WILL BE DELETED!*****

TOPIC: Antenna selection near miss.

Antenna selection near miss. 23 Jan 2016 08:23 #1

  • la7tha
  • la7tha's Avatar
  • OFFLINE
  • Posts: 93
  • Thank you received: 11
Hi All,
I suggested programers to make antenna selection available from the front panel in Expert SDR software witch they did in the last version, thank you. I am actively using A3 and A2 and use A2 for my receiving antennas. Some days ago i was nerly selecting wrong and set the TX antenna port to A2. This means if i did it would blow my SAL 30 Receiving Preamp etc. I would urgently suggest that programmers make a tick of box in menue where I.E "A2 receiv only". You should not by able to select A2 by mistake as TX port. This happen when i chasing VP8STI on 160 late night and was not 100 % awake. This mistakes can easily happen.

73 rune LA7THA


A2RXonlyredtickoff.jpg
Last Edit: 23 Jan 2016 08:24 by la7tha.
The administrator has disabled public write access.

Antenna selection near miss. 04 Feb 2016 08:31 #2

  • VassiL
  • VassiL's Avatar
  • OFFLINE
  • Разработчик SDR-техники, Developer of SDR
  • Posts: 1299
  • Thank you received: 248
Hi Rune,
Thank you for your suggestion.
Please see picture below. The latest version of the ESDR2 has antenna selection menu in main window. Also antenna status is shown near the main frequency scale(see picture).

RX Only -- status for antenna, which can be choosen by user it's a good idea, I'll inform about this suggestion our programmers, will see.
Thanks.

Antennaselection.jpg
Василий, Vasily,
Expert Electronics
The administrator has disabled public write access.

Antenna selection near miss. 24 Oct 2016 08:24 #3

  • VassiL
  • VassiL's Avatar
  • OFFLINE
  • Разработчик SDR-техники, Developer of SDR
  • Posts: 1299
  • Thank you received: 248
Hi Rune,
The RX Only antenna switch is supported now in the latest version 1.1.3 RC5 of the ExpertSDR2 software. Look here: eesdr.com/en/forum-en/software-ss2/6877-expertsdr2?start=45#8726
Василий, Vasily,
Expert Electronics
The administrator has disabled public write access.
Time to create page: 0.100 seconds