Эксперт Электроникс - Expert Electronics

Welcome, Guest

TOPIC: ESSB settings

ESSB SunSDR2PRO 06 Dec 2019 20:36 #16

EI9HEB OFFLINE Posts: 46 Thank you received: 15	Hi VU3ESV, I have tested similar setup but non-ASIO driver creates massive latency in the system, and real monitoring of the audio just melts the brain @n1mjf How do you route the audio from RME ADI-2 Pro DAC to SUNSDR ?? Also, a similar question to other users, if you use external processing how do you route the audio to your SUNSDR ?? Regards Pawel EI9HEB /SP9DR
	How do you VooDoo? Last Edit: 06 Dec 2019 20:38 by EI9HEB. Reason: spelling correction The administrator has disabled public write access.

ESSB SunSDR2PRO 07 Dec 2019 11:47 #17

n1mjf
OFFLINE
Posts: 32
Thank you received: 3

EI9HEB wrote:

Hi VU3ESV,
I have tested similar setup but non-ASIO driver creates massive latency in the system, and real monitoring of the audio just melts the brain

@n1mjf
How do you route the audio from RME ADI-2 Pro DAC to SUNSDR ??

Also, a similar question to other users, if you use external processing how do you route the audio to your SUNSDR ??

Regards
Pawel EI9HEB /SP9DR

I route my audio just as VU3ESV showed but I do not use Ableton. I will try with that software later today.

Current set up: SunSDR2 DX, HiFi audio, Alpha Delta DX-CC up 20 feet.

The administrator has disabled public write access.

ESSB SunSDR2PRO 07 Dec 2019 12:14 #18

n1mjf OFFLINE Posts: 32 Thank you received: 3	I will have to make a profile in this software now and continue setting it up. This software seems very nice. Here is the settings I used and yes, it did take making a new VAC line.
	Current set up: SunSDR2 DX, HiFi audio, Alpha Delta DX-CC up 20 feet. The administrator has disabled public write access.

ESSB SunSDR2PRO 07 Dec 2019 13:47 #19

EI9HEB
OFFLINE
Posts: 46
Thank you received: 15

Hi all,
You can download Melda plugins from my dropbox, there is very good frequency shifter very useful for creating nice harmonics.
Also, there is an old profile called "5 charmoniczna" ( 5th harmonics) I was using for Kenwood TS870s.
But you be missing Focusrite VSTplugin compressor, gate and EQ which comes with the USB interface.
www.dropbox.com/sh/n3rae2gny96kflw/AADxAVNGEfrFWA5Eamuk154Ya?dl=0

How do you VooDoo?

The administrator has disabled public write access.

The following user(s) said Thank You: sv2sfg, 2E0GKG

ESSB SunSDR2PRO 10 Dec 2019 18:01 #20

G0VQY OFFLINE Posts: 9	EI9HEB wrote: Sorry for my spelling that was from the phone, How do you feed the audio in to the Sun?? if it's USB that it must be plugged into the PC and then be using the PC Mike setting on the software. Sorry, I know you're not asking me but that's how I connect my USB microphones to the radio
	The administrator has disabled public write access.

ESSB SunSDR2PRO 10 Dec 2019 18:18 #21

EI9HEB OFFLINE Posts: 46 Thank you received: 15	@G0VQY Penn Thank you for your answer, the more answers the better. General "trend" how SUNSDR users feed the audio is a good knowledge too.
	How do you VooDoo? The administrator has disabled public write access.

ESSB SunSDR2PRO 29 Dec 2019 07:23 #22

SP7IDX OFFLINE Posts: 1	does anyone use the SunSDR2 DX headset Arlan RS55SL, any to provide with the settings?
	73, Waldi SP7IDX sp7idx-hexbeam.eu The administrator has disabled public write access.

ESSB SunSDR2PRO 20 Aug 2020 16:48 #23

SM0JZT OFFLINE Posts: 4	Im trying to figure out how to configure ESSB-settinigs in my SUNSDR2 DX. My guess is that I change the High frequency cut in SSB to around 5kHz What more to do besides a good microphone ?? I have a studio-mike connected with XLR to a mixer that is connected to my PC with USB.
	SM0JZT - Tilman D. Thulesius Sweden The administrator has disabled public write access.

ESSB SunSDR2PRO 15 Jan 2023 09:16 #24

ea5iwt OFFLINE Posts: 3	you sent the low to 80Hz no you need to set it to 20Hz not 80hz the different will be big g0uut
	The administrator has disabled public write access.

ESSB SunSDR2PRO 15 Jan 2023 09:16 #25

ea5iwt OFFLINE Posts: 3	ea5iwt wrote: you sent the low to 60Hz no you need to set it to 20Hz not 60hz the different will be big g0uut
	The administrator has disabled public write access.

ESSB SunSDR2PRO 15 Jan 2023 09:17 #26

ea5iwt OFFLINE Posts: 3	as well the buffer size need to be set correctea5iwt wrote: ea5iwt wrote: you sent the low to 60Hz no you need to set it to 20Hz not 60hz the different will be big g0uut
	The administrator has disabled public write access.

ESSB SunSDR2PRO 23 Jan 2023 11:05 #27

Anto66 OFFLINE Posts: 16	Ciao, potresti utilizzare 2 schede audio e risolvi..
	The administrator has disabled public write access.