Эксперт Электроникс - Expert Electronics - Topic: Colibrinano with a transceiver (3/3)

Welcome, Guest

TOPIC: Colibrinano with a transceiver

Colibrinano with a transceiver 14 Jul 2021 08:47 #31

Alex65 OFFLINE Posts: 10	Hi board , thanks to all . Unfortunately i leave this project also because 1000 Mp CAT is very slow and i'm not able to manage one vertical antenna and one magnetic loop Wellbrook with SDR I come back to my SunSDr2 Pro . I wanted to macth an old trx with 200 watts and an Colibri SDR
	The administrator has disabled public write access.

Colibrinano with a transceiver 14 Jul 2021 18:25 #32

ELKING

ELKING wrote:

Rome wrote:

Hi, Elvis.
Please send us a video of the issue with Update 10 (describing the setup).
And the same situation with Update 8 - drive.google.com/file/d/1hzghokRsTjd62SpBgd9dX_bgJgUURlxz/view?usp=sharing (as requested)

Hi, Rome
thanks for the Update 8

I'm not home tonight but I'll do the test tomorrow night.
br Elvis

Hi, Rome here is 2 video clip same setup same settings IC7300+PTRX7300+ColibriNANO

Video 1 update 8 ADC OK
drive.google.com/file/d/1Vqj2u_5yOJZpTdJkfAuPKx5PyseUdIl-/view?usp=sharing

Video2 update 10 ADC NG red alert overload ADC
drive.google.com/file/d/1Iku4c7VyNXZHVDQsIaT4cmOgy0uei9hS/view?usp=sharing

Last Edit: 14 Jul 2021 18:32 by ELKING. Reason: forgot paste link

The administrator has disabled public write access.

Colibrinano with a transceiver 20 Jul 2021 10:51 #33

Alex65 OFFLINE Posts: 10	Ciao Helking , i'm just thinking on your issue . When you use if-out with PTRX7300 are there signal when you transmit ? Why we see overload on Colibri ? 73, SANDRO
	The administrator has disabled public write access.

Colibrinano with a transceiver 21 Jul 2021 15:14 #34

ELKING

Alex65 wrote:

Ciao Helking , i'm just thinking on your issue .
When you use if-out with PTRX7300 are there signal when you transmit ?
Why we see overload on Colibri ?

73, SANDRO

Hi Sandro

Something is wrong with update 10 expert sdr2 software with update 8 expert sdr2 is everything ok.
I have been using such a combination for a long time and over several versions of expert sdr and until update 10 I never had a problem with red alert on RX and TX.
With update 10 there is a problem with overloading the ADC on the RX as well as in my combination on the TX
My setup PTRX7300 is RX out no IF with no limit on bandwidth all HF I can listen to 80m on the IC7300 but at the same time, I am with expert sdr on the 20m band

Of course, when I go to Tx there is muting on this other band.
br Elvis

The administrator has disabled public write access.

Colibrinano with a transceiver 22 Jul 2021 14:36 #35

Alex65 OFFLINE Posts: 10	Hi Helking But is better to hear SDR colibri or Icom 7300 ? Ciao
	The administrator has disabled public write access.

Colibrinano with a transceiver 28 Jul 2021 12:37 #36

ELKING	Hi Sandro Both are great it’s all a matter of taste regards Elvis
	The administrator has disabled public write access.

Colibrinano with a transceiver 06 Aug 2021 12:26 #37

Alex65 OFFLINE Posts: 10	"Rome' wrote : Hi, Sandro. Please try to use SDC as a hub, connect it to ESDR2 via TCI and your Yaesu ft 1000Mp via CAT (or OmniRig if CAT is unavailable)". Hi Rome sorry for delay that i reply . Do you have some sample to follow? Is not simple to understand SDC . 73, sandro
	Last Edit: 06 Aug 2021 12:29 by Alex65. The administrator has disabled public write access.

Colibrinano with a transceiver 03 May 2022 00:38 #38

k4dvw OFFLINE Posts: 1	Can you tell me how to use the RX mute with a Yaesu Transceiver connecting it to RX out? Can seem to figure it out. Audio never shuts off when transmitting.
	The administrator has disabled public write access.

Colibrinano with a transceiver 03 May 2022 11:28 #39

ELKING	OmniRig > EESDR ver 2 update 8 > Options > CAT > put data from Omnirig Rig1 > Enable CAT When Transceiver is connected via the CAT protocol when the trx goes to the transmit , the mute in the Expert SDR2 ColibriNANO is automatically switched on.
	The administrator has disabled public write access.

Colibrinano with a transceiver 03 May 2022 12:35 #40

danielwee OFFLINE Posts: 90 Thank you received: 15	Might be the OmniRig setting for DTR/RTS relating to PTT? I've set mine to LOW for both DTR and RTS in OmniRig.
	Last Edit: 03 May 2022 12:35 by danielwee. The administrator has disabled public write access.

Colibrinano with a transceiver